FordParts
My Garage
My Account
Cart
OEM 2009 Ford Edge Vapor Canister
Fuel Vapor Canister- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Vapor Canister found
2009 Ford Edge Vapor Canister Part Number: 7T4Z-9D653-B
$261.08 MSRP: $443.64You Save: $182.56 (42%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Cannister - Fuel Vapour Storage; Vapor Canister Purge Solenoid; Cannister - Fuel Vapour Store
- Base No.: 9D653
- Item Weight: 10.60 Pounds
- Item Dimensions: 7.1 x 11.9 x 30.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7T4Z-9D653-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Edge Vapor Canister
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Edge Vapor Canister available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Edge Vapor Canister as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Ford Edge Vapor Canister Parts Q&A
- Q: How to Service and Repair the Vapor Canister on 2009 Ford Edge?A: A primary safety step before servicing or repairing the evaporative emission control canister is to keep fuel-related areas free of smoking materials and open flames and personal electronic devices due to the dangerous flammability of the mixtures. All EVAP system work requires disconnecting the grounding battery cable. Connect the vehicle to a hoist on neutral with proper mounting of the hoist arm at the frame lifting point. The procedure requires removing three bolts together with a pin-type retainer and EVAP shield before reinstallation where each component needs to be tightened to 9 Nm (80 lb-in). Proceed by disconnecting the EVAP canister vent solenoid electrical connector and following with the fuel vapor tube-to-EVAP canister quick connect coupling and the fuel vapor tube assembly-to-EVAP canister quick connect coupling and then removed the fuel vapor tube connection to the dust separator. The installation process requires tightening of the three EVAP canister bolts to 9 Nm (80 lb-in) after reinstallation. The EVAP canister becomes free after removal of its pin-type retainer. Start by putting the alignment tab in the body of the new canister before using the pin-type retainer and three bolts for installation. The evaporative emission system leak test must be performed to verify system performance.