My Garage
Cart

OEM 2009 Ford Escape Antenna Cable

Radio Antenna Cable
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Antenna Cable found

  • 2009 Ford Escape Antenna Cable - 8L8Z-18812-C
    2009 Ford Escape Antenna Cable Diagram - 8L8Z-18812-C
    View related parts

    2009 Ford Escape Antenna Cable Part Number: 8L8Z-18812-C

    $23.00 MSRP: $33.48
    You Save: $10.48 (32%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Cable Assembly - Extension; Cable
    • Manufacturer Note: BLACK
    • Replaces: 8L8Z-18812-A, 8L8Z-18812-B
    • Base No.: 18812
    • Item Weight: 0.40 Pounds
    • Item Dimensions: 15.8 x 10.7 x 0.6 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 8L8Z-18812-C
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2009 Ford Escape Submodels:
    • Hybrid, Limited, Limited Hybrid, XLS, XLT | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

2009 Ford Escape Antenna Cable

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Escape Antenna Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Escape Antenna Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Escape Antenna Cable Parts Q&A

  • Q: How to service and repair the antenna cable for satellite radio without navigation on 2009 Ford Escape?
    A: Service of satellite radio antenna cable requires first removing the Right Hand A-pillar trim panel and Right Hand sun visor. You should lower the headliner front enough to access the satellite radio antenna electrical connector and then disconnect this connector before removing the antenna. Proceed to break the satellite radio antenna cable connection from its place at the Satellite Digital Audio Receiver System (SDARS) module electrical connector. You should undo both the installation methods when installing the setup. New satellite radio antenna placement should follow the harness route for vehicles that have navigation systems. All these installations require proper securing.