How to service and repair the headlamp dimmer switch on 2009 Ford Escape?

The first step for repairing the headlamp dimmer switch includes the removal of the steering column opening trim. You must first remove the three bolts securing the lower steering column shroud and afterward take out the shrouds from both upper and lower positions. Next disconnect the multifunction switch electrical connector after removing its two screws then disassemble the switch from its location. The service requires you to execute the opposite steps you followed during removal.

OEM 2009 Ford Escape Dimmer Switch

Light Dimmer Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Dimmer Switch found

View related parts
2009 Ford Escape Dimmer Switch Part Number: 7L1Z-11691-BA
$29.38 MSRP: $41.67
You Save: $12.29 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor Assembly; Instrument Panel Dimmer Switch; Headlight Dimmer Switch; Instrument Light Rheostat; Rheostat
- Manufacturer Note: BLACK
- Base No.: 11691
- Item Weight: 0.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L1Z-11691-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Escape Submodels:
- Hybrid, Limited, Limited Hybrid, XLS, XLT | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

2009 Ford Escape Dimmer Switch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Escape Dimmer Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Escape Dimmer Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Escape Dimmer Switch Parts Q&A

Q: How to service and repair the headlamp dimmer switch on 2009 Ford Escape?
A: The first step for repairing the headlamp dimmer switch includes the removal of the steering column opening trim. You must first remove the three bolts securing the lower steering column shroud and afterward take out the shrouds from both upper and lower positions. Next disconnect the multifunction switch electrical connector after removing its two screws then disassemble the switch from its location. The service requires you to execute the opposite steps you followed during removal.