FordParts
My Garage
My Account
Cart
OEM 2009 Ford Escape Bumper
Bumper Fascia- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Bumpers found
2009 Ford Escape Bumper Cover, Front Part Number: AL8Z-17D957-BPTM
$257.38 MSRP: $377.95You Save: $120.57 (32%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Bumper Assembly - Front; Bumper Cover, Front
- Position: Front
- Replaces: 8L8Z-17D957-BPTM
- Base No.: 17D957
- Item Weight: 10.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AL8Z-17D957-BPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Escape Bumper Cover, Front Part Number: 8L8Z-17D957-CPTM
$332.11 MSRP: $365.76You Save: $33.65 (10%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Bumper Assembly - Front; Bumper Cover, Front
- Position: Front
- Base No.: 17D957
- Item Weight: 10.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L8Z-17D957-CPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Escape Reinforcement, Front Part Number: 9L8Z-17757-A
$93.79 MSRP: $115.47You Save: $21.68 (19%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Bumper Assembly - Front; Bumper Cover Reinforcement Beam, Front; Bumper Cover Reinforcement, Front
- Position: Front
- Replaces: YL8Z-17757-AA, 5L8Z-17757-AA
- Base No.: 17757
- Item Weight: 8.30 Pounds
- Item Dimensions: 5.2 x 45.5 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L8Z-17757-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Escape Bumper Cover, Rear Part Number: 8L8Z-17K835-APTM
$194.90 MSRP: $225.58You Save: $30.68 (14%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Replaces: 8L8Z-17K835-BPTM
- Base No.: 17K835
- Item Weight: 10.10 Pounds
- Item Dimensions: 137.7 x 50.5 x 24.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L8Z-17K835-APTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Escape Bumper
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Escape Bumper available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Escape Bumper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Ford Escape Bumper Parts Q&A
- Q: How to remove and replace the front bumper cover on 2009 Ford Escape?A: The first step to remove and replace the front bumper cover involves placing tape on its corners and below the headlamp to stop paint damage. Set the vehicle in neutral mode then install the hoist beneath it. Start by taking out 6 pushpins from the front splash shield that have 3 each on the sides followed by the 4 fender splash shield-to-air deflector bolts positioned 2 each on both sides and torque both types of fasteners to 5 Nm (44 lb-in) when reattaching. The third step involves removing the 3 air deflector bolts before final installation will require 5 Nm (44 lb-in) torque tightening. You should detach the 2 front bumper cover center pushpins from the bumper cover as well as disconnect the fog lamp electrical connectors and the front parking aid sensor harness if equipped. The grille requires removal of its 2 bracket bolts for the radiator support section while you should apply 8 Nm torque (71 lb-in) for reinstalling the bolts. Re-install the front bumper cover by setting it into place before pressing the sides next to the bottom headlamp corner toward each other until it properly locks onto the bumper slides.