FordParts
My Garage
My Account
Cart
OEM 2009 Ford Escape Exhaust Manifold
Engine Exhaust Manifold- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Exhaust Manifolds found
2009 Ford Escape Exhaust Manifold Part Number: AM6Z-5G232-A
$1312.88 MSRP: $1741.79You Save: $428.91 (25%)Product Specifications- Other Name: Manifold Assembly - Exhaust; Catalytic Converter with Integrated Exhaust Manifold; Manifold Converter; Manifold W/Converter; Manifold; Catalytic Converter
- Replaces: 5M6Z-5G232-BB, 5M6Z-5G232-A, 9M6Z-5G232-A
- Base No.: 9430
- Item Weight: 20.70 Pounds
- Item Dimensions: 16.7 x 13.3 x 8.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AM6Z-5G232-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Right; Catalytic Converter; Manifold
- Position: Passenger Side
- Base No.: 9430
- Item Weight: 9.30 Pounds
- Item Dimensions: 17.7 x 13.3 x 8.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7E5Z-9430-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Exhaust Manifold And Catalyst; Catalytic Converter with Integrated Exhaust Manifold, Left; Manifold Converter; Manifold W/Converter; Exhaust Manifold And Catalyst Assembly; Catalytic Converter
- Position: Driver Side
- Base No.: 5G232
- Item Weight: 15.30 Pounds
- Item Dimensions: 15.4 x 12.9 x 8.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L8Z-5G232-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Escape Exhaust Manifold Part Number: 9L8Z-9430-A
Product Specifications- Other Name: Manifold Assembly - Exhaust; Manifold
- Base No.: 9430
- Item Weight: 16.40 Pounds
- Item Dimensions: 20.3 x 13.1 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L8Z-9430-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Escape Exhaust Manifold
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Escape Exhaust Manifold available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Escape Exhaust Manifold as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Ford Escape Exhaust Manifold Parts Q&A
- Q: How to remove and replace the exhaust manifold on 2009 Ford Escape?A: The exhaust manifold replacement process starts with placing the vehicle in neutral position and hoisting it before proceeding. Start by removing both the exhaust downpipe and exhaust intermediate pipe before disconnecting the electrical connector of the heated oxygen sensor (HO2S). The first step is to take out both the 4 exhaust manifold heat shield bolts along with the heat shield itself. Remove the 7 nuts from the exhaust manifold while discarding them for the exhaust manifold removal alongside the gasket. Pluck out the 7 exhaust manifold fasteners while discarding them afterward clean and visually inspect the exhaust manifold. 7 new exhaust manifold studs require installation according to 17 Nm (150 lb-in) torque setting. The correct torque specification for catalytic converter nuts must be achieved before you install the converter bracket bolts to stop exhaust leaks. You need to first use new nuts and the exhaust manifold gasket to attach and tighten the exhaust manifold in two steps of 48 Nm (35 lb-ft). The installation process includes replacing the exhaust manifold heat shield through reinstallation of its 4 bolts which should be tightened to 10 Nm (89 lb-in). Afterward, reinstall the exhaust downpipe and exhaust intermediate pipe.