How to Service and Repair the Sway Bar Link on 2009 Ford Escape?

Service and repair work on the sway bar link requires the first step to be wheel and tire removal. Every sway bar link nut operation requires the hex-holding feature because it helps stop the ball stud from rotating. The upper sway bar link nut must be discarded before installing a new one which requires torquing to 63 Nm (46 lb-ft). The process is performed again for the lower sway bar link but uses a new replacement nut which requires tightening to 63 Nm (46 lb-ft) torque. The ball joints and boots of sway bar links should be checked for replacement of worn-out parts. Finish the installation by performing the complete reverse order of the removal steps for the sway bar link. When replacing suspension fasteners the technician should use parts with the exact part numbers or equivalent quality while abstaining from using power tools to protect sway bar link ball joints and boots. Install the sway link to the sway bar while maintaining the sway bar perpendicular to the link during the tightening steps to guarantee correct link nut seating.

OEM 2009 Ford Escape Sway Bar Link

Stabilizer Sway Bar Link

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Sway Bar Links found

View related parts
2009 Ford Escape Stabilizer Link, Front Part Number: 7L8Z-5K483-B
$34.57 MSRP: $54.89
You Save: $20.32 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Front; Suspension Stabilizer Bar Link Kit; Sway Bar Link Kit; Sway Bar Link
- Position: Front
- Replaces: 7L8Z-5K483-A, 5L8Z-5K483-AA
- Base No.: 5K483
- Item Weight: 0.70 Pounds
- Item Dimensions: 19.2 x 6.4 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 7L8Z-5K483-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Escape Submodels:
- Hybrid, Limited, Limited Hybrid, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2009 Ford Escape Stabilizer Link, Rear Part Number: 9L8Z-5K484-B
$51.54 MSRP: $86.36
You Save: $34.82 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Rear; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Rear
- Base No.: 5K484
- Item Weight: 0.70 Pounds
- Item Dimensions: 8.4 x 7.8 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 9L8Z-5K484-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Escape Submodels:
- Hybrid, Limited, Limited Hybrid, XLS, XLT | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

2009 Ford Escape Sway Bar Link

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Escape Sway Bar Link available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Escape Sway Bar Link as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Escape Sway Bar Link Parts Q&A

Q: How to Service and Repair the Sway Bar Link on 2009 Ford Escape?
A: Service and repair work on the sway bar link requires the first step to be wheel and tire removal. Every sway bar link nut operation requires the hex-holding feature because it helps stop the ball stud from rotating. The upper sway bar link nut must be discarded before installing a new one which requires torquing to 63 Nm (46 lb-ft). The process is performed again for the lower sway bar link but uses a new replacement nut which requires tightening to 63 Nm (46 lb-ft) torque. The ball joints and boots of sway bar links should be checked for replacement of worn-out parts. Finish the installation by performing the complete reverse order of the removal steps for the sway bar link. When replacing suspension fasteners the technician should use parts with the exact part numbers or equivalent quality while abstaining from using power tools to protect sway bar link ball joints and boots. Install the sway link to the sway bar while maintaining the sway bar perpendicular to the link during the tightening steps to guarantee correct link nut seating.