How to remove and replace the front bumper cover on 2009 Ford Expedition?

You should start the process of front bumper cover removal by taking out the three lower air deflector pin-type retainers before placing the air deflector to the side. The front bumper cover requires removal of two lower pin-type retainers that should be followed by removal of the four screws from each left-hand and right-hand front fender splash shield. The entire front bumper cover should be detached from the fenders by removing four bolts which need to be tightened to 11 Nm (97 lb-in) when reinstalling. You should disconnect the fog lamp electrical connector while discharging the park aid sensor electrical connector when the vehicle includes these components. The upper air deflector removal process requires disconnecting ten pin-type retainers beginning with the right side shown and completing the left side in a similar manner. First remove the two pin-type retainers located on the upper section of the lower air deflector after which remove the four bolts of the grille-to-radiator support. To install the front bumper cover complete its installation by executing the steps of reinstallation in reverse order.

OEM 2009 Ford Expedition Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Bumpers found

View related parts
2009 Ford Expedition Lower Cover, Front Part Number: CL1Z-17D957-BPTM
$285.27 MSRP: $333.26
You Save: $47.99 (15%)
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover, Front Lower
- Position: Front Lower
- Replaces: 7L1Z-17D957-CPTM
- Base No.: 17D957B
- Item Weight: 7.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: CL1Z-17D957-BPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XL, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Expedition Impact Bar, Front Part Number: CL1Z-17757-B
$135.09 MSRP: $208.47
You Save: $73.38 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Impact Bar, Front
- Position: Front
- Replaces: 7L1Z-17757-A, CL1Z-17757-A
- Base No.: 17757
- Item Weight: 29.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: CL1Z-17757-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Expedition Upper Cover, Front Part Number: 7L1Z-17D957-BPTM
$195.30 MSRP: $213.21
You Save: $17.91 (9%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Front Upper
- Position: Front Upper
- Base No.: 17D957A
- Item Weight: 27.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L1Z-17D957-BPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XL, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Expedition Impact Bar, Rear Part Number: 7L1Z-17906-A
$607.73 MSRP: $900.33
You Save: $292.60 (33%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Cover Reinforcement Beam, Rear; Bumper Impact Bar, Rear; Reinforcement
- Position: Rear
- Base No.: 17906
- Item Weight: 56.10 Pounds
- Item Dimensions: 70.4 x 26.5 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L1Z-17906-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Expedition Impact Bar, Rear Part Number: 7L1Z-17906-C
$505.76 MSRP: $742.67
You Save: $236.91 (32%)
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Cover Reinforcement Beam, Rear; Bumper Impact Bar, Rear; Reinforcement
- Position: Rear
- Base No.: 17906
- Item Weight: 68.00 Pounds
- Item Dimensions: 67.7 x 28.4 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L1Z-17906-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, Funkmaster Flex Edition, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Expedition Bumper Cover, Rear Part Number: 7L1Z-17K835-DPTM
$272.80 MSRP: $400.58
You Save: $127.78 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Base No.: 17K835
- Item Weight: 26.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L1Z-17K835-DPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- EL Eddie Bauer, EL King Ranch, EL Limited, EL XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Expedition Bumper Cover, Rear Part Number: 7L1Z-17K835-CA
$239.46 MSRP: $351.63
You Save: $112.17 (32%)
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Base No.: 17K835
- Item Weight: 14.30 Pounds
- Item Dimensions: 75.5 x 36.8 x 11.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L1Z-17K835-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Expedition Bumper Cover, Rear Part Number: 7L1Z-17K835-BPTM
$239.83 MSRP: $352.17
You Save: $112.34 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Base No.: 17K835
- Item Weight: 27.60 Pounds
- Item Dimensions: 82.4 x 20.4 x 37.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L1Z-17K835-BPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, Funkmaster Flex Edition, King Ranch, Limited, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Expedition Impact Bar, Rear Part Number: 7L1Z-17906-B
$214.80 MSRP: $315.42
You Save: $100.62 (32%)
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Impact Bar, Rear; Reinforcement
- Position: Rear
- Base No.: 17906
- Item Weight: 54.10 Pounds
- Item Dimensions: 72.1 x 26.8 x 8.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L1Z-17906-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Expedition Upper Cover, Front Part Number: 7L1Z-17D957-APTM
$192.91 MSRP: $280.80
You Save: $87.89 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Front Upper
- Manufacturer Note: Paint to match
- Position: Front Upper
- Base No.: 17D957A
- Item Weight: 27.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L1Z-17D957-APTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XL, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Expedition Bumper Cover, Rear Part Number: 7L1Z-17K835-AA
$273.65 MSRP: $401.83
You Save: $128.18 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Base No.: 17K835
- Item Weight: 25.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L1Z-17K835-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, Funkmaster Flex Edition, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Expedition Impact Bar, Rear Part Number: 7L1Z-17906-D
$480.68 MSRP: $705.85
You Save: $225.17 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Cover Reinforcement Beam, Rear; Bumper Impact Bar, Rear; Reinforcement
- Position: Rear
- Base No.: 17906
- Item Weight: 54.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L1Z-17906-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, Funkmaster Flex Edition, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Expedition Lower Cover, Front Part Number: 7L1Z-17D957-AA
$188.93 MSRP: $275.00
You Save: $86.07 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover, Front Lower
- Position: Front Lower
- Base No.: 17D957B
- Item Weight: 27.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L1Z-17D957-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XL, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS

2009 Ford Expedition Bumper

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Expedition Bumper available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Expedition Bumper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Expedition Bumper Parts Q&A

Q: How to remove and replace the front bumper cover on 2009 Ford Expedition?
A: You should start the process of front bumper cover removal by taking out the three lower air deflector pin-type retainers before placing the air deflector to the side. The front bumper cover requires removal of two lower pin-type retainers that should be followed by removal of the four screws from each left-hand and right-hand front fender splash shield. The entire front bumper cover should be detached from the fenders by removing four bolts which need to be tightened to 11 Nm (97 lb-in) when reinstalling. You should disconnect the fog lamp electrical connector while discharging the park aid sensor electrical connector when the vehicle includes these components. The upper air deflector removal process requires disconnecting ten pin-type retainers beginning with the right side shown and completing the left side in a similar manner. First remove the two pin-type retainers located on the upper section of the lower air deflector after which remove the four bolts of the grille-to-radiator support. To install the front bumper cover complete its installation by executing the steps of reinstallation in reverse order.