FordParts
My Garage
My Account
Cart
OEM 2009 Ford Expedition Fuel Pump
Gas Pump- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Fuel Pumps found
2009 Ford Expedition Fuel Pump Part Number: 9L1Z-9H307-D
$303.32 MSRP: $503.64You Save: $200.32 (40%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Sender And Pump Assembly; Electric Fuel Pump; Fuel Pump Module Assembly
- Manufacturer Note: Includes Fuel Filter, Not Serviced Separate
- Replaces: 9L1Z-9H307-C, PFS-531
- Base No.: 9H307
- Item Weight: 6.60 Pounds
- Item Dimensions: 24.5 x 12.5 x 12.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L1Z-9H307-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Expedition Fuel Pump Part Number: 9L1Z-9H307-EA
$321.21 MSRP: $514.55You Save: $193.34 (38%)Product Specifications- Other Name: Sender And Pump Assembly; Electric Fuel Pump; Fuel Pump Module Assembly
- Replaces: 9L1Z-9H307-A, PFS-483, 9L1Z-9H307-E
- Base No.: 9H307
- Item Weight: 4.20 Pounds
- Item Dimensions: 13.3 x 10.5 x 14.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L1Z-9H307-EA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Expedition Fuel Pump
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Expedition Fuel Pump available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Expedition Fuel Pump as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Ford Expedition Fuel Pump Parts Q&A
- Q: How to service and repair the fuel gauge sender and fuel pump module for the 106L and 127L fuel tanks on 2009 Ford Expedition?A: Universal service and repair of the fuel gauge sender and fuel pump module for both 106L (28 Gal) and 127L (33.5 Gal) fuel tanks begins with removing the fuel tank while keeping fuel-related areas free of smoking and electronic devices due to strong flammability of fuel mixtures. When reinstalling the fuel pump module cover on 127L fuel tanks use 9 Nm torque for the four cover nuts. The procedure starts with disconnecting the return fuel tube at the fuel pump module quick connect coupling then moving to disconnect the fuel tank pressure sensor along with the vapor tube assembly before disconnecting the supply fuel tube quick connect coupling. The Fuel Tank Sender Unit Wrench should be used to detach the fuel pump lock ring. When handling the fuel pump assembly of the 106L fuel tank proceed with caution to avoid damaging the fuel level sensor while using a screwdriver to aid in the fuel pump removal from the mounting flange and discard the O-ring seal. The procedure for the 127L fuel tank includes the removal of the fuel pump assembly that requires noting the alignment tabs before discarding the O-ring seal. The process finishes when you reverse-installation steps that were used for removing it.