How to service the Seat Heater Switch in the second row on 2009 Ford Expedition?

Service of the second row heated seat switch requires removal of the rear cup holder by releasing its four retainer clips then reinstalling any retained floor console clips to the cup holder before final installation. Before moving on you must remove the two screws from the front floor console rear panel then release its six retainer clips before separating the rear panel. The service process begins with disconnecting electrical connectors while removing the rear panel but takes care to reinstall all remaining retainers from the floor console to the rear cover before final installation. Separate the heated seat switch(es) after their release. The reinstallation process will start with the opposite actions applied during the removal phase.

OEM 2009 Ford Expedition Seat Heater Switch

Seat Heater Level Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Seat Heater Switch found

View related parts
2009 Ford Expedition Seat Heat Switch, Center Part Number: 9L1Z-14D694-AA
$28.63 MSRP: $45.45
You Save: $16.82 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly; Seat Heater Switch, Center; Power Seat Switch; Switch; Seat Heater Switch
- Manufacturer Note: RH/LH
- Position: Center
- Base No.: 14D694
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.9 x 2.3 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 9L1Z-14D694-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX

2009 Ford Expedition Seat Heater Switch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Expedition Seat Heater Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Expedition Seat Heater Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Expedition Seat Heater Switch Parts Q&A

Q: How to service the Seat Heater Switch in the second row on 2009 Ford Expedition?
A: Service of the second row heated seat switch requires removal of the rear cup holder by releasing its four retainer clips then reinstalling any retained floor console clips to the cup holder before final installation. Before moving on you must remove the two screws from the front floor console rear panel then release its six retainer clips before separating the rear panel. The service process begins with disconnecting electrical connectors while removing the rear panel but takes care to reinstall all remaining retainers from the floor console to the rear cover before final installation. Separate the heated seat switch(es) after their release. The reinstallation process will start with the opposite actions applied during the removal phase.