How to service the ABS Control Module, specifically the Electronic Brake Control Module on 2009 Ford Expedition?

Service of the Electronic Brake Control Module's ABS Module must start by removing the Air Cleaner cover retaining clips and disconnecting the Mass Air Flow sensor electrical connector along with releasing the retaining clips. The outlet clamp of the ACL should be loosen first before removing the ACL cover from the outlet pipe. Make sure to tighten it to 4 Nm (35 lb-in) when reinstalling. The service procedure begins by removing three HCU bracket-to-frame bolts that will need to be tightened to 20 Nm (177 lb-in) when reinstalling. Check the ABS module electrical connector for disconnection before you uninstall the module using four ABS module bolts that should get tightened to 2 Nm (18 lb-in). The procedure requires vehicle configuration and sensor calibration of Roll Stability Control (RSC(R)) when a newly installed ABS module serves vehicles with this system. The IVD Initialization sequence can be executed through a scan tool to perform the procedure. Vehicle owners need to understand that when their vehicles have RSC(R), technicians should never swap the ABS module with the Hydraulic Control Unit between vehicles with this system. Replacement installations of a new HCU demand the implementation of brand-new ABS module and HCU as one combined unit with service parts from the recent service update.

OEM 2009 Ford Expedition ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 ABS Control Modules found

View related parts
2009 Ford Expedition Control Module
Part Number: 9L1Z-2C219-F
$735.08 MSRP: $1005.23
You Save: $270.15 (27%)
ADD TO CART
Product Specifications
- Other Name: Control; ABS Control Module; ABS Control Unit
- Replaces: 9L1Z-2C219-E, 9L1Z-2C219-D
- Base No.: 2C219
- Item Weight: 2.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L1Z-2C219-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XLT, King Ranch, Limited, XLT | 8 Cyl 5.4 L FLEX
View related parts
2009 Ford Expedition Control Module
Part Number: 7L1Z-2C219-A
$655.88 MSRP: $896.92
You Save: $241.04 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Control; ABS Control Module; ABS Control Unit
- Base No.: 2C219
- Item Weight: 2.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L1Z-2C219-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Expedition Control Module
Part Number: 9L1Z-2C405-C
$1066.73 MSRP: $1580.33
You Save: $513.60 (33%)
Product Specifications
- Other Name: Unit Assembly - Control; ABS Hydraulic Assembly; ABS Control Module; Modulator Valve; ABS Control Unit
- Manufacturer Note: Complete Unit HCU And ECU
- Replaces: 9L1Z-2C405-B
- Base No.: 2C405
- Item Weight: 8.20 Pounds
- Item Dimensions: 9.1 x 8.5 x 8.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L1Z-2C405-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XLT, King Ranch, Limited, XLT | 8 Cyl 5.4 L FLEX
View related parts
2009 Ford Expedition Control Module
Part Number: 7L1Z-2C219-B
Product Specifications
- Other Name: Control; ABS Control Module; ABS Control Unit
- Base No.: 2C219
- Item Weight: 2.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L1Z-2C219-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XL, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Expedition Control Module
Part Number: 7L1Z-2C215-A
Product Specifications
- Other Name: Module; ABS Control Module; Modulator Valve
- Base No.: 2C215
- Item Weight: 5.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L1Z-2C215-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XL, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS

2009 Ford Expedition ABS Control Module

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Expedition ABS Control Module available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Expedition ABS Control Module as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Expedition ABS Control Module Parts Questions & Experts Answers

Q: How to service the ABS Control Module, specifically the Electronic Brake Control Module on 2009 Ford Expedition?
A: Service of the Electronic Brake Control Module's ABS Module must start by removing the Air Cleaner cover retaining clips and disconnecting the Mass Air Flow sensor electrical connector along with releasing the retaining clips. The outlet clamp of the ACL should be loosen first before removing the ACL cover from the outlet pipe. Make sure to tighten it to 4 Nm (35 lb-in) when reinstalling. The service procedure begins by removing three HCU bracket-to-frame bolts that will need to be tightened to 20 Nm (177 lb-in) when reinstalling. Check the ABS module electrical connector for disconnection before you uninstall the module using four ABS module bolts that should get tightened to 2 Nm (18 lb-in). The procedure requires vehicle configuration and sensor calibration of Roll Stability Control (RSC(R)) when a newly installed ABS module serves vehicles with this system. The IVD Initialization sequence can be executed through a scan tool to perform the procedure. Vehicle owners need to understand that when their vehicles have RSC(R), technicians should never swap the ABS module with the Hydraulic Control Unit between vehicles with this system. Replacement installations of a new HCU demand the implementation of brand-new ABS module and HCU as one combined unit with service parts from the recent service update.