How to service the rear suspension shock absorber and spring assembly on 2009 Ford Expedition?

The first step of servicing rear suspension shock absorber and spring assembly requires lower arm removal according to appropriate lower arm procedures. Move forward by getting rid of the shock absorber upper mount nuts before adding new nuts which need a torque setting of 40 Nm (30 lb-ft). Next remove the shock absorber with its related spring assembly. Proceed with reinstallation when service-related procedures do not involve either the shock absorber or individual spring components. Before assembly placement mark the upper mount and both spring and shock absorber. A proper spring compressor should enable compression of the spring until the shock absorber tension becomes zero. The person should remove the shock rod and unfasten the nut and washer before taking out the shock absorber and discarding the nut. New shock absorber installation calls for tightening the new nut up to 56 Nm (41 lb-ft). Terminating the process involves upper mount dust boot and insulator removal after which you will perform the removal steps in reverse order. Using new shock absorber parts that precisely match their original part numbers or equivalent performance is vital because non-genuine designs could cause operational problems. All components must be correctly secured by following the prescribed torque values during the reassembly process.

OEM 2009 Ford Expedition Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

30 Shock Absorbers found

View related parts
2009 Ford Expedition Shock Absorber, Front Part Number: AL1Z-18124-E
$159.16 MSRP: $252.73
You Save: $93.57 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly; Suspension Shock Absorber, Front; Strut
- Position: Front
- Replaces: 7L1Z-18124-U, 8L1Z-18124-G, 8L1Z-18124-M, 7L1Z-18124-W, 7L1Z-18124-T, 8L1Z-18124-H, 7L1Z-18124-S, ASH-12270, ASH-24739, 8L1Z-18124-Q, ASH-24741, ASH-12317, AL1Z-18124-C, 8L1Z-18124-D, ASH-24740, 8L1Z-18124-N, ASH-12289, ASH-24731, 7L1Z-18124-V, 7L1Z-18124-X, ASH-24735, ASH-12315, ASH-24733, AL1Z-18124-B, 8L1Z-18124-P, ASH-24736, ASH-24737, 8L1Z-18124-K, 8L1Z-18124-B, ASH-24742, ASH-12288, ASH-12312, AL1Z-18124-A, AL1Z-18124-D, ASH-12313, ASH-24738, ASH-12320, ASH-12311
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AL1Z-18124-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XL, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Expedition Shock Part Number: 8L1Z-18125-DS
$146.88 MSRP: $247.27
You Save: $100.39 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly
- Replaces: 8L1Z-18125-P, 8L1Z-18125-L, 8L1Z-18125-Q, 8L1Z-18125-W, 8L1Z-18125-S, ASH-12324, ASH-12325, 8L1Z-18125-Z, 8L1Z-18125-M, ASH-12336, ASH-12321, 8L1Z-18125-T, ASH-12328, ASH-12322, ASH-12332, 8L1Z-18125-N, ASH-12323, ASH-12329, ASH-12330, 8L1Z-18125-U
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L1Z-18125-DS
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Expedition Shock Part Number: 8L1Z-18125-DT
$145.80 MSRP: $245.45
You Save: $99.65 (41%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly
- Replaces: 8L1Z-18125-R, 8L1Z-18125-Y, 8L1Z-18125-V, ASH-12334, 8L1Z-18125-X, ASH-12335, ASH-12331, ASH-12326
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L1Z-18125-DT
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Expedition Shock Part Number: 7L1Z-18125-R
$146.56 MSRP: $232.73
You Save: $86.17 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly; Shock Absorber
- Replaces: 7L1Z-18125-Q, ASH-12327
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L1Z-18125-R
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following 2009 Ford Expedition Submodels:
- EL Eddie Bauer, EL King Ranch, EL Limited, EL XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Expedition Strut Part Number: 8L1Z-18124-J
$37.18 MSRP: $54.12
You Save: $16.94 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly
- Replaces: ASH-12319, 8L1Z-18124-F
- Item Weight: 9.20 Pounds
- Item Dimensions: 27.0 x 5.9 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L1Z-18124-J
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- EL Eddie Bauer, EL King Ranch, EL Limited, EL XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Expedition Shock Absorber Part Number: 8L1Z-18125-C
Product Specifications
- Other Name: Kit - Shock Absorber; Suspension Strut Assembly Kit; Suspension Shock Absorber; Complete Strut Kit; Complete Strut; Shock
- Base No.: 18125
- Item Weight: 6.10 Pounds
- Item Dimensions: 25.5 x 5.8 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 8L1Z-18125-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Expedition Strut Part Number: 8L1Z-18124-A
Product Specifications
- Other Name: Shock Absorber Assembly
- Base No.: 18124
- Item Weight: 9.60 Pounds
- Item Dimensions: 26.7 x 6.1 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L1Z-18124-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, Funkmaster Flex Edition, King Ranch, Limited, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Expedition Strut Part Number: 8L1Z-18124-C
Product Specifications
- Other Name: Shock Absorber Assembly
- Base No.: 18124
- Item Weight: 10.30 Pounds
- Item Dimensions: 26.0 x 5.6 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L1Z-18124-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, Funkmaster Flex Edition, King Ranch, Limited, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Expedition Shock Absorber Part Number: 8L1Z-18125-E
Product Specifications
- Other Name: Kit - Shock Absorber; Suspension Strut Assembly Kit; Complete Strut Kit; Complete Strut
- Base No.: 18125
- Item Weight: 5.30 Pounds
- Item Dimensions: 25.8 x 3.2 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 8L1Z-18125-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Expedition Shock Absorber Part Number: 8L1Z-18125-F
Product Specifications
- Other Name: Kit - Shock Absorber
- Base No.: 18125
- Item Weight: 6.20 Pounds
- Item Dimensions: 26.3 x 5.7 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 8L1Z-18125-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Expedition Shock Absorber Part Number: 8L1Z-18125-G
Product Specifications
- Other Name: Kit - Shock Absorber; Suspension Strut Assembly Kit; Complete Strut Kit; Complete Strut
- Base No.: 18125
- Item Weight: 5.50 Pounds
- Item Dimensions: 26.0 x 3.1 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 8L1Z-18125-G
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Expedition Shock Absorber Part Number: 8L1Z-18125-H
Product Specifications
- Other Name: Kit - Shock Absorber; Suspension Strut Assembly Kit; Suspension Shock Absorber; Complete Strut Kit; Complete Strut; Shock
- Base No.: 18125
- Item Weight: 6.40 Pounds
- Item Dimensions: 26.3 x 5.6 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 8L1Z-18125-H
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Expedition Shock Absorber Part Number: 8L1Z-18125-J
Product Specifications
- Other Name: Kit - Shock Absorber; Suspension Strut Assembly Kit; Suspension Shock Absorber; Complete Strut Kit; Complete Strut; Shock
- Base No.: 18125
- Item Weight: 6.20 Pounds
- Item Dimensions: 26.3 x 5.7 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 8L1Z-18125-J
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Expedition Shock Absorber Part Number: 8L1Z-18125-K
Product Specifications
- Other Name: Kit - Shock Absorber; Suspension Strut Assembly Kit; Suspension Shock Absorber; Complete Strut Kit; Complete Strut; Shock
- Base No.: 18125
- Item Weight: 5.40 Pounds
- Item Dimensions: 25.8 x 3.1 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 8L1Z-18125-K
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Expedition Shock Absorber Part Number: 7L1Z-18124-CA
Product Specifications
- Other Name: Kit - Shock Absorber; Suspension Strut Assembly Kit; Suspension Shock Absorber; Complete Strut Kit; Complete Strut; Shock
- Base No.: 18124
- Item Weight: 9.70 Pounds
- Item Dimensions: 26.5 x 5.7 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 7L1Z-18124-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Expedition Shock Absorber Part Number: 7L1Z-18124-CC
Product Specifications
- Other Name: Kit - Shock Absorber; Suspension Strut Assembly Kit; Suspension Shock Absorber; Complete Strut Kit; Complete Strut; Shock
- Base No.: 18124
- Item Weight: 9.70 Pounds
- Item Dimensions: 25.3 x 5.7 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 7L1Z-18124-CC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, Funkmaster Flex Edition, King Ranch, Limited, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Expedition Shock Absorber Part Number: 7L1Z-18124-DG
Product Specifications
- Other Name: Kit - Shock Absorber; Suspension Strut Assembly Kit; Complete Strut Kit; Complete Strut
- Base No.: 18124
- Item Weight: 10.40 Pounds
- Item Dimensions: 26.0 x 5.6 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L1Z-18124-DG
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- EL Eddie Bauer, EL King Ranch, EL Limited, EL XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Expedition Shock Absorber Part Number: 7L1Z-18125-CA
Product Specifications
- Other Name: Kit - Shock Absorber; Suspension Strut Assembly Kit; Suspension Shock Absorber; Complete Strut Kit; Complete Strut; Shock
- Base No.: 18125
- Item Weight: 9.40 Pounds
- Item Dimensions: 25.3 x 5.7 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 7L1Z-18125-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, Funkmaster Flex Edition, King Ranch, Limited, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Expedition Shock Absorber Part Number: 7L1Z-18125-DM
Product Specifications
- Other Name: Kit - Shock Absorber; Suspension Strut Assembly Kit; Suspension Shock Absorber; Complete Strut Kit; Complete Strut; Shock
- Base No.: 18125
- Item Weight: 9.70 Pounds
- Item Dimensions: 26.3 x 5.7 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L1Z-18125-DM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Expedition Shock Absorber Part Number: 8L1Z-18124-CB
Product Specifications
- Other Name: Kit - Shock Absorber; Suspension Strut Assembly Kit; Suspension Shock Absorber; Complete Strut Kit; Complete Strut; Shock
- Base No.: 18124
- Item Weight: 7.80 Pounds
- Item Dimensions: 25.5 x 5.7 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 8L1Z-18124-CB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS

| Page 1 of 2 |Next >

1-20 of 30 Results

2009 Ford Expedition Shock Absorber

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Expedition Shock Absorber available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Expedition Shock Absorber as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Expedition Shock Absorber Parts Q&A

Q: How to service the rear suspension shock absorber and spring assembly on 2009 Ford Expedition?
A: The first step of servicing rear suspension shock absorber and spring assembly requires lower arm removal according to appropriate lower arm procedures. Move forward by getting rid of the shock absorber upper mount nuts before adding new nuts which need a torque setting of 40 Nm (30 lb-ft). Next remove the shock absorber with its related spring assembly. Proceed with reinstallation when service-related procedures do not involve either the shock absorber or individual spring components. Before assembly placement mark the upper mount and both spring and shock absorber. A proper spring compressor should enable compression of the spring until the shock absorber tension becomes zero. The person should remove the shock rod and unfasten the nut and washer before taking out the shock absorber and discarding the nut. New shock absorber installation calls for tightening the new nut up to 56 Nm (41 lb-ft). Terminating the process involves upper mount dust boot and insulator removal after which you will perform the removal steps in reverse order. Using new shock absorber parts that precisely match their original part numbers or equivalent performance is vital because non-genuine designs could cause operational problems. All components must be correctly secured by following the prescribed torque values during the reassembly process.