How to remove and replace the rear bumper cover on 2009 Ford Explorer?

The first step requires removing tail lamp assemblies before you can replace the rear bumper cover on an Explorer vehicle. When installing the bumper cover secure its two bracket bolts by tightening them to 11 Nm (97 lb-in) torque specification. First you should remove nine bumper cover pin-type retainers and disconnect the rear parking aid sensor electrical connector when it is equipped. The proper method to handle the rear bumper cover involves raising the outer corners before pulling it upward directly until it is fully released while preventing any twisting motion. To install the new bumper cover proceed by following the reverse sequence of removal while moving essential components.

OEM 2009 Ford Explorer Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Bumpers found

View related parts
2009 Ford Explorer Bumper Cover, Front Part Number: 6L2Z-17D957-VAPTM
$360.70 MSRP: $529.67
You Save: $168.97 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Base No.: 17D957
- Item Weight: 10.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L2Z-17D957-VAPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Explorer Submodels:
- Eddie Bauer, Limited, XLS, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Ford Explorer Bumper Cover, Front Upper Part Number: 7L2Z-17D957-RBPTM
$150.96 MSRP: $219.73
You Save: $68.77 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Front, Front Upper; Upper Cover
- Position: Front Upper
- Replaces: 6L2Z-17D957-RAPTM, 6L2Z-17D957-TAPTM
- Base No.: 17D957A
- Item Weight: 9.20 Pounds
- Item Dimensions: 81.1 x 28.1 x 24.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L2Z-17D957-RBPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Explorer Submodels:
- Eddie Bauer, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Ford Explorer Bumper Cover, Rear Part Number: 1L2Z-17K835-LA
$167.97 MSRP: $259.22
You Save: $91.25 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Base No.: 17K835
- Item Weight: 8.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L2Z-17K835-LA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Explorer Submodels:
- Eddie Bauer, Limited, XLT, XLT Sport | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Ford Explorer Lower Cover, Front Part Number: 6L2Z-17D957-UAPTM
$115.17 MSRP: $177.23
You Save: $62.06 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Front Lower
- Position: Front Lower
- Base No.: 17D957B
- Item Weight: 4.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L2Z-17D957-UAPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Explorer Submodels:
- Eddie Bauer, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS

2009 Ford Explorer Bumper

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Explorer Bumper available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Explorer Bumper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Explorer Bumper Parts Q&A

Q: How to remove and replace the rear bumper cover on 2009 Ford Explorer?
A: The first step requires removing tail lamp assemblies before you can replace the rear bumper cover on an Explorer vehicle. When installing the bumper cover secure its two bracket bolts by tightening them to 11 Nm (97 lb-in) torque specification. First you should remove nine bumper cover pin-type retainers and disconnect the rear parking aid sensor electrical connector when it is equipped. The proper method to handle the rear bumper cover involves raising the outer corners before pulling it upward directly until it is fully released while preventing any twisting motion. To install the new bumper cover proceed by following the reverse sequence of removal while moving essential components.