FordParts
My Garage
My Account
Cart
OEM 2009 Ford Explorer Sport Trac Fuel Tank Strap
Gas Tank Strap- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Fuel Tank Straps found
2009 Ford Explorer Sport Trac Strap, Front Passenger Side Part Number: 6L2Z-9054-A
$35.34 MSRP: $48.89You Save: $13.55 (28%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Strap Assembly - Fuel Tank; Fuel Tank Strap, Front; Fuel Tank Strap
- Position: Front Passenger Side
- Replaces: 6L2Z-9054-AA
- Base No.: 9092A
- Item Weight: 1.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L2Z-9054-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
- Product Specifications
- Other Name: Strap Assembly - Fuel Tank; Fuel Tank Strap, Rear; Fuel Tank Strap
- Manufacturer Note: Includes Attaching Parts
- Position: Rear Driver Side
- Replaces: 6L2Z-9054-BA, 2L2Z-9054-EA, 5L2Z-9054-CA
- Base No.: 9092B
- Item Weight: 1.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L2Z-9054-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Explorer Sport Trac Fuel Tank Strap
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Explorer Sport Trac Fuel Tank Strap available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Explorer Sport Trac Fuel Tank Strap as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Ford Explorer Sport Trac Fuel Tank Strap Parts Q&A
- Q: How to Service and Repair Fuel Tank Straps on 2009 Ford Explorer Sport Trac?A: Begin the fuel tank strap repair process only when the vehicle remains in neutral mode and hangs on a hoist. Take necessary precautions by staying away from smoking or using lighted tobacco and open flames because fuel-related parts contain highly flammable blends. Shutter the driving gear after setting the vehicle on a hoist while in neutral position then remove four bolts along with a nut and fuel tank skid plate. Tighten skid plate bolts to 40 Nm (30 lb-ft) when replacing the components. The Explorer and Mountaineer require driveshaft removal during this process. A suitable jack should be used for supporting the fuel tank before removing the bolt from the rear support strap then tighten the bolt to 48 Nm (35 lb-ft) during reinstallation. After nut removal of the front support strap proceed with tightening the strap to 48 Nm (35 lb-ft) before replacement. The installation process ends with performing the reverse of removal steps.