How to service and repair the hood latch on 2009 Ford Explorer Sport Trac?

Before removing the two hood latch bolts for servicing the hood latch, mark down its current position since this will help with accurate reinstallation alignment. Detach the hood latch release cable from the latch before removing it after you have taken out its supporting bolts that you should tighten at 12 Nm (106 lb-in). Reassemble the latch following these steps while the alignment should be checked to verify proper placement of the latch.

OEM 2009 Ford Explorer Sport Trac Hood Latch

Engine Hood Latch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Hood Latch found

View related parts
2009 Ford Explorer Sport Trac Lock, Front
Part Number: 6L2Z-16700-AA
$56.46 MSRP: $82.18
You Save: $25.72 (32%)
Product Specifications
- Other Name: Latch Assembly - Hood; Hood Latch, Front; Latch; Hood Latch
- Position: Front
- Base No.: 16700
- Item Weight: 5.50 Pounds
- Item Dimensions: 8.1 x 7.7 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L2Z-16700-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Explorer Sport Trac Submodels:
- Limited, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS

2009 Ford Explorer Sport Trac Hood Latch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Explorer Sport Trac Hood Latch available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Explorer Sport Trac Hood Latch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Explorer Sport Trac Hood Latch Parts Questions & Experts Answers

Q: How to service and repair the hood latch on 2009 Ford Explorer Sport Trac?
A: Before removing the two hood latch bolts for servicing the hood latch, mark down its current position since this will help with accurate reinstallation alignment. Detach the hood latch release cable from the latch before removing it after you have taken out its supporting bolts that you should tighten at 12 Nm (106 lb-in). Reassemble the latch following these steps while the alignment should be checked to verify proper placement of the latch.