My Garage
Cart

OEM 2009 Ford F-150 Alternator

Generator
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Alternators found

  • 2009 Ford F-150 Alternator Diagram - 9L3Z-10346-A
    View related parts

    2009 Ford F-150 Alternator Part Number: 9L3Z-10346-A

    $272.04 MSRP: $449.09
    You Save: $177.05 (40%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Remanufactured Denso First Time Fit Alternator Assembly.
    • Base No.: 10346
    • Item Weight: 16.20 Pounds
    • Item Dimensions: 12.5 x 10.4 x 8.4 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 9L3Z-10346-A
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2009 Ford F-150 Submodels:
    • FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, STX, SVT Raptor, XL, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX
  • 2009 Ford F-150 Alternator - AL1Z-10346-A
    2009 Ford F-150 Alternator Diagram - AL1Z-10346-A
    View related parts

    2009 Ford F-150 Alternator Part Number: AL1Z-10346-A

    $273.14 MSRP: $450.91
    You Save: $177.77 (40%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Alternator Assembly; Remanufactured Denso First Time Fit Alternator; Alternator Reman; Reman Alternator; Alternators
    • Replaces: 9L3Z-10346-C
    • Base No.: 10346
    • Item Weight: 16.20 Pounds
    • Item Dimensions: 8.2 x 8.2 x 8.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: AL1Z-10346-A
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2009 Ford F-150 Submodels:
    • FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, STX, SVT Raptor, XL, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX
  • 2009 Ford F-150 Alternator - 9L3Z-10346-B
    2009 Ford F-150 Alternator Diagram - 9L3Z-10346-B
    View related parts

    2009 Ford F-150 Alternator Part Number: 9L3Z-10346-B

    $268.76 MSRP: $443.64
    You Save: $174.88 (40%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Alternator Assembly; Remanufactured Denso First Time Fit Alternator; Alternator Reman; Reman Alternator; Alternators
    • Manufacturer Note: 135 Amp Alternator
    • Base No.: 10346
    • Item Weight: 16.20 Pounds
    • Item Dimensions: 8.9 x 8.5 x 8.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 9L3Z-10346-B
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2009 Ford F-150 Submodels:
    • FX2, STX, XL, XLT | 8 Cyl 4.6 L GAS

2009 Ford F-150 Alternator

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford F-150 Alternator available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford F-150 Alternator as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford F-150 Alternator Parts Q&A

  • Q: How to service and repair the alternator on a 4.6L (3V) engine on 2009 Ford F-150?
    A: The first step for altering or servicing the alternator on a 4.6L (3V) engine requires disconnection of the battery. Begin by taking off the Air Cleaner (ACL) outlet pipe then use the Front End Accessory Drive (FEAD) belt tensioner to rotate it clockwise for belt position. The generator harness locator must be released from the generator bracket before removing four bolts securing that bracket which need a torque of 10 Nm (89 lb-in) for reinstallation. Proceed with the generator installation by loosening its two bolts before relocation. Make sure generator bolts achieve 25 Nm (18 lb-ft) tightness when restoring them to place. First disconnect the generator electrical connector then relocate the B+ protective boot while removing the B+ nut and terminal from the generator before extracting the device and ensure the B+ nut gets tightened to 17 Nm (150 lb-in) when reinstalled. Complete the installation process by following the reverse order of the removal protocol.