FordParts
My Garage
My Account
Cart
OEM 2008 Ford F-150 Alternator
Generator- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Alternators found
2008 Ford F-150 Alternator Part Number: 6U2Z-10V346-GGRM
$230.85 MSRP: $367.27You Save: $136.42 (38%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Re-Manufactured Alternator Assembly
- Replaces: 6U2Z-10V346-BBRM, 7L3Z-10346-BARM, 7L3Z-10346-BRM, GLV-8629-RM, GL-8744-RM, GLV-8716-RM, GLV-9053-RM, 6L3Z-10V346-BARM, GLV-8771-RM, 7L3Z-10346-CARM, 6U2Z-10V346-EMRM, 7L3Z-10346-B, 6L3Z-10V346-BBRM, GL-975-RM, GL-8864-RM, GL-923
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6U2Z-10V346-GGRM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford F-150 Alternator Part Number: 7L3Z-10346-FRM
$261.58 MSRP: $418.18You Save: $156.60 (38%)Product Specifications- Other Name: Re-Manufactured Alternator Assembly
- Replaces: 7L3Z-10346-AARM, 7L3Z-10346-CRM, 7L3Z-10346-A, GL-8863-RM, 7L3Z-10346-ARM, GL-922, GL-974-RM, GL-8743-RM
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L3Z-10346-FRM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford F-150 Alternator
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford F-150 Alternator available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford F-150 Alternator as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Ford F-150 Alternator Parts Q&A
- Q: How to service the alternator on 2008 Ford F-150?A: Service of the alternator starts with disconnecting the battery terminal. The front end accessory drive (FEAD) belt tensioner requires counterclockwise rotation before putting the FEAD belt to the side. The generator B+ protective boot should be set aside while disconnecting the generator electrical connector followed by unfastening the generator B+ terminal nut using a torque wrench set to 8 Nm (71 lb-in). After servicing the alternator, reinstall the nut and terminal but tighten it to 8 Nm (71 lb-in). The procedure for replacement includes removing the nut from the bracket while setting the bracket aside; reinstall this component at 25 Nm (18 lb-ft). Implement the same installment process to remove the nut then set the generator harness bracket in place with a final torque value of 25 Nm (18 lb-ft). The next step involves removing two generator stud bolts before installation where the torque should be set at 48 Nm (35 lb-ft). When reinstalling the generator you must tighten it to 48 Nm (35 lb-ft). The completion of installation entails performing the procedure in reverse order.