How to Service the Crankshaft Position Sensor on 2009 Ford F-150?

The Crankshaft Position (CKP) Sensor service starts with parking the vehicle in NEUTRAL position then setting it on a hoist. Detach the accessory drive belt by rotating it clockwise while it leaves the A/C compressor pulley. Efficient loosening of the A/C compressor bolts enables you to slide the compressor down 25 mm (1 in) so that you can access the CKP sensor. The service of the CKP sensor involves disconnecting its electrical connector followed by removing the retaining bolt. Reinstall the bolt under a torque setting of 10 Nm (89 lb-in). Clean engine oil should be applied to the O-ring seal after sensor removal then place it back into position while tightening A/C compressor bolts to 25 Nm (18 lb-ft). Finish the Misfire Monitor Neutral Profile Correction procedure using a scan tool under the directions provided by the tool screen.

OEM 2009 Ford F-150 Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Crankshaft Position Sensor found

View related parts
2009 Ford F-150 Crankshaft Position Sensor
Part Number: 1W7Z-6C315-AB
$41.11 MSRP: $65.27
You Save: $24.16 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor - Crankshaft Position; Engine Crankshaft Position Sensor; Crankshaft Sensor; Position Sensor; Sensor - Crankshaft Position - Cps
- Manufacturer Note: Sensor asy. (Crankshaft position) #1W7E 6C315-AA
- Replaces: 1W7Z-6C315-AA
- Base No.: 6C315
- Item Weight: 0.30 Pounds
- Item Dimensions: 8.1 x 6.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1W7Z-6C315-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford F-150 Submodels:
- Base, FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lightning, Limited, Platinum, STX, SVT Raptor, THE 60TH ANNIVERSARY EDITION, XL, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS

2009 Ford F-150 Crankshaft Position Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford F-150 Crankshaft Position Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford F-150 Crankshaft Position Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford F-150 Crankshaft Position Sensor Parts Questions & Experts Answers

Q: How to Service the Crankshaft Position Sensor on 2009 Ford F-150?
A: The Crankshaft Position (CKP) Sensor service starts with parking the vehicle in NEUTRAL position then setting it on a hoist. Detach the accessory drive belt by rotating it clockwise while it leaves the A/C compressor pulley. Efficient loosening of the A/C compressor bolts enables you to slide the compressor down 25 mm (1 in) so that you can access the CKP sensor. The service of the CKP sensor involves disconnecting its electrical connector followed by removing the retaining bolt. Reinstall the bolt under a torque setting of 10 Nm (89 lb-in). Clean engine oil should be applied to the O-ring seal after sensor removal then place it back into position while tightening A/C compressor bolts to 25 Nm (18 lb-ft). Finish the Misfire Monitor Neutral Profile Correction procedure using a scan tool under the directions provided by the tool screen.