How to Service and Repair the Motor and Transmission Mount for the 4R70E/4R75E on 2009 Ford F-150?

The first step to handle 4R70E/4R75E transmission mount servicing requires hoisting the vehicle when the transmission shifts to NEUTRAL. The first step requires removing any transfer case skid plate present in the vehicle. The service process requires removing two exhaust hanger bolts before you can take out the rear transmission insulator nuts. A transmission jack should lift the transmission rear portion slightly before removing the bolts to extract the rear transmission insulator. You should insert the new transmission insulator before securing it with bolts that need a torque setting of 80 Nm (59 lb-ft). Lower the transmission unit onto the crossmember before installing nuts which should be tightened to 103 Nm (76 lb-ft). Put back the exhaust hanger bolts to the crossmember while tightening them to 40 Nm (30 lb-ft). Transfer case skid plate installation applies only when needed before securing it using 48 Nm (35 lb-ft) torque.

OEM 2009 Ford F-150 Motor And Transmission Mount

Motor and Trans Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Motor And Transmission Mounts found

View related parts
2009 Ford F-150 Transmission Mount
Part Number: AL3Z-6068-C
$234.47 MSRP: $290.00
You Save: $55.53 (20%)
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Manual Transmission Mount; Transfer Case Mount
- Replaces: 9L3Z-6068-E
- Base No.: 6068
- Item Weight: 7.80 Pounds
- Item Dimensions: 8.7 x 5.1 x 11.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AL3Z-6068-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford F-150 Submodels:
- FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, STX, SVT Raptor, XL, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX
View related parts
2009 Ford F-150 Motor Mount
Part Number: 9L3Z-6038-A
$94.58 MSRP: $137.67
You Save: $43.09 (32%)
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Engine Mount, Left, Left Lower, Right; Engine Mount Bracket; Lower Mount; Mount
- Manufacturer Note: INSULATOR
- Replaces: 7L1Z-6038-FC
- Base No.: 6038B
- Item Weight: 9.50 Pounds
- Item Dimensions: 8.5 x 4.8 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L3Z-6038-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford F-150 Submodels:
- FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, STX, SVT Raptor, XL, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX
View related parts
2009 Ford F-150 Mount Bracket, Driver Side
Part Number: 9L3Z-6038-B
$93.52 MSRP: $143.92
You Save: $50.40 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Engine Mount Bracket, Left; Engine Mount Torque Strut; Motor Mount; Side Mount Bracket; Mount; Engine Mount Bracket
- Position: Driver Side
- Base No.: 6038A
- Item Weight: 5.70 Pounds
- Item Dimensions: 9.3 x 6.2 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L3Z-6038-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford F-150 Submodels:
- FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, STX, SVT Raptor, XL, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX
View related parts
2009 Ford F-150 Motor Mount
Part Number: 9L3Z-6038-C
$186.64 MSRP: $271.67
You Save: $85.03 (32%)
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Engine Mount, Left, Right; Engine Mount Bracket; Mount
- Replaces: 7L1Z-6038-FA
- Base No.: 6038C
- Item Weight: 14.40 Pounds
- Item Dimensions: 7.4 x 7.4 x 10.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L3Z-6038-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford F-150 Submodels:
- FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, STX, XL, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX
View related parts
2009 Ford F-150 Transmission Mount
Part Number: GL3Z-6068-E
$81.40 MSRP: $118.48
You Save: $37.08 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Exhaust System Hanger; Auto & Manual Transmission Mounts; Hanger; Mount
- Replaces: BL3Z-6068-G, FL3Z-6068-C, GL3Z-6068-B, 9L3Z-6068-B
- Condition: New
- Fitment Type: Direct Replacement
- SKU: GL3Z-6068-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following 2009 Ford F-150 Submodels:
- FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lariat Limited, Platinum, SSV, STX, Tremor, XL, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L FLEX, 8 Cyl 5.4 L FLEX, 8 Cyl 6.2 L GAS
View related parts
2009 Ford F-150 Trans Crossmember
Part Number: 9L3Z-6A023-A
Product Specifications
- Other Name: Support; Transmission Crossmember
- Base No.: 6A023
- Item Weight: 15.60 Pounds
- Item Dimensions: 5.8 x 37.6 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L3Z-6A023-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford F-150 Submodels:
- FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lariat Limited, Limited, Platinum, STX, SVT Raptor, XL, XLT | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L CNG, 6 Cyl 3.7 L FLEX, 6 Cyl 3.7 L LPG, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L FLEX, 8 Cyl 5.4 L FLEX, 8 Cyl 6.2 L GAS
View related parts
2009 Ford F-150 Transmission Mount
Part Number: 9L3Z-6068-D
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Automatic Transmission Mount; Transfer Case Mount
- Base No.: 6068
- Item Weight: 9.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L3Z-6068-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford F-150 Submodels:
- STX, XL, XLT | 8 Cyl 4.6 L GAS
View related parts
2009 Ford F-150 Transmission Mount
Part Number: 9L3Z-6068-C
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Automatic Transmission Mount; Transfer Case Mount
- Base No.: 6068
- Item Weight: 13.40 Pounds
- Item Dimensions: 5.3 x 10.7 x 10.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L3Z-6068-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford F-150 Submodels:
- STX, XL, XLT | 8 Cyl 4.6 L GAS

2009 Ford F-150 Motor And Transmission Mount

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford F-150 Motor And Transmission Mount available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford F-150 Motor And Transmission Mount as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford F-150 Motor And Transmission Mount Parts Questions & Experts Answers

Q: How to Service and Repair the Motor and Transmission Mount for the 4R70E/4R75E on 2009 Ford F-150?
A: The first step to handle 4R70E/4R75E transmission mount servicing requires hoisting the vehicle when the transmission shifts to NEUTRAL. The first step requires removing any transfer case skid plate present in the vehicle. The service process requires removing two exhaust hanger bolts before you can take out the rear transmission insulator nuts. A transmission jack should lift the transmission rear portion slightly before removing the bolts to extract the rear transmission insulator. You should insert the new transmission insulator before securing it with bolts that need a torque setting of 80 Nm (59 lb-ft). Lower the transmission unit onto the crossmember before installing nuts which should be tightened to 103 Nm (76 lb-ft). Put back the exhaust hanger bolts to the crossmember while tightening them to 40 Nm (30 lb-ft). Transfer case skid plate installation applies only when needed before securing it using 48 Nm (35 lb-ft) torque.