How to remove and replace the left-hand parking brake cable on 2009 Ford F-250 Super Duty?

The installation of a new left-hand parking brake cable starts with a release of the rear parking brake tension. First disconnect the right-hand cable from the left-hand conduit equalizer before removing the left-hand cable from the front cable. Remove two wire form bracket bolts from the frame rail before setting the cable and conduit to the side. The installation of the bolts should reach a torque value of 40 Nm (30 lb-ft). The installation process for left-hand parking brake-to-spring U-bolt plate requires vehicles with F-250 and F-350 model numbers to route the parking brake cable and conduit outside the leaf spring assembly before removing and tightening the bolt to 28 Nm (21 lb-ft). The left-hand bracket assembly requires the parking brake cable to be freed before rotating it ninety degrees to disconnect from the actuating lever for completion of the cable removal procedure. The installation process ends with performing the steps in reverse order from removal.

OEM 2009 Ford F-250 Super Duty Parking Brake Cable

Emergency Parking Brake Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Parking Brake Cables found

View related parts
2009 Ford F-250 Super Duty Front Cable Part Number: BC3Z-2853-C
$49.26 MSRP: $82.55
You Save: $33.29 (41%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Replaces: 8C3Z-2853-C, BC3Z-2853-B
- Base No.: 2853
- Item Weight: 0.90 Pounds
- Item Dimensions: 47.4 x 1.2 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BC3Z-2853-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.4 L DIESEL, 8 Cyl 6.7 L DIESEL
View related parts
2009 Ford F-250 Super Duty Rear Cable, Passenger Side Part Number: 7C3Z-2A635-AC
$83.21 MSRP: $136.91
You Save: $53.70 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Position: Passenger Side
- Base No.: 2A635
- Item Weight: 3.10 Pounds
- Item Dimensions: 20.1 x 20.0 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7C3Z-2A635-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.4 L DIESEL
View related parts
2009 Ford F-250 Super Duty Rear Cable, Driver Side Part Number: 7C3Z-2A635-BL
$78.90 MSRP: $129.82
You Save: $50.92 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Position: Driver Side
- Base No.: 2A635
- Item Weight: 3.20 Pounds
- Item Dimensions: 3.5 x 20.9 x 19.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7C3Z-2A635-BL
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.4 L DIESEL
View related parts
2009 Ford F-250 Super Duty Front Cable Part Number: 8C3Z-2853-B
$32.15 MSRP: $50.18
You Save: $18.03 (36%)
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Replaces: 7C3Z-2853-B
- Base No.: 2853
- Item Weight: 1.10 Pounds
- Item Dimensions: 15.1 x 6.6 x 19.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C3Z-2853-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.4 L DIESEL
View related parts
2009 Ford F-250 Super Duty Rear Cable, Driver Side Part Number: 7C3Z-2A635-AL
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Position: Driver Side
- Base No.: 2A635
- Item Weight: 3.40 Pounds
- Item Dimensions: 15.1 x 6.3 x 19.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7C3Z-2A635-AL
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford F-250 Super Duty Submodels:
- FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.4 L DIESEL

2009 Ford F-250 Super Duty Parking Brake Cable

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford F-250 Super Duty Parking Brake Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford F-250 Super Duty Parking Brake Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford F-250 Super Duty Parking Brake Cable Parts Q&A

Q: How to remove and replace the left-hand parking brake cable on 2009 Ford F-250 Super Duty?
A: The installation of a new left-hand parking brake cable starts with a release of the rear parking brake tension. First disconnect the right-hand cable from the left-hand conduit equalizer before removing the left-hand cable from the front cable. Remove two wire form bracket bolts from the frame rail before setting the cable and conduit to the side. The installation of the bolts should reach a torque value of 40 Nm (30 lb-ft). The installation process for left-hand parking brake-to-spring U-bolt plate requires vehicles with F-250 and F-350 model numbers to route the parking brake cable and conduit outside the leaf spring assembly before removing and tightening the bolt to 28 Nm (21 lb-ft). The left-hand bracket assembly requires the parking brake cable to be freed before rotating it ninety degrees to disconnect from the actuating lever for completion of the cable removal procedure. The installation process ends with performing the steps in reverse order from removal.