FordParts
My Garage
My Account
Cart
OEM 2009 Ford Flex Exhaust Pipe
Exhaust Tail Pipe- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Exhaust Pipes found
2009 Ford Flex Exhaust Pipe, Front Part Number: 9A4Z-5G274-C
$258.44 MSRP: $339.85You Save: $81.41 (24%)Product Specifications- Other Name: Pipe - Exhaust; Exhaust Crossover Pipe, Front; Exhaust Y Pipe; Tail Pipe; Front Pipe
- Position: Front
- Replaces: 9A4Z-5G274-B
- Base No.: 5G274
- Item Weight: 11.90 Pounds
- Item Dimensions: 46.8 x 13.7 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9A4Z-5G274-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Flex Intermediate Pipe Part Number: 9G1Z-5A212-A
Product Specifications- Other Name: Pipe - Exhaust Front; Exhaust Intermediate Pipe, Rear; Exhaust Pipe; Direct-Fit Exhaust; Exhaust System Kit; Tail Pipe; Extension Pipe; Intermed Pipe; Pipe - Exhaust - Front
- Replaces: 8G1Z-5A212-B, 8G1Z-5A212-A
- Base No.: 5A212
- Item Weight: 3.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9G1Z-5A212-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Flex Exhaust Pipe
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Flex Exhaust Pipe available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Flex Exhaust Pipe as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Ford Flex Exhaust Pipe Parts Q&A
- Q: How to Service the Exhaust Pipe on 2009 Ford Flex?A: The first step for servicing the exhaust intermediate pipe starts by setting the vehicle on a hoist with neutral transmission. When servicing the intermediate exhaust pipe start by taking out the two exhaust Y-pipe flange nuts and disposal of the gasket. Follow the installation procedure and achieve adequate torque of 40 Nm (30 lb-ft) on the flange nuts. After loosening the Torca® clamp nut the reinstall procedure requires its tightening to 48 Nm (35 lb-ft). Before removing the exhaust intermediate pipe you must detach it from both the muffler and tailpipe. The installation process requires using new gaskets and exhaust fasteners while performing the reversal of removal steps. Begin engine operation to verify exhaust leaks exist or not.