FordParts
My Garage
My Account
Cart
OEM 2009 Ford Flex Window Regulator
Electric Power Window Regulator- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Window Regulators found
2009 Ford Flex Window Regulator, Front Passenger Side Part Number: 8A8Z-7423208-A
$120.79 MSRP: $191.80You Save: $71.01 (38%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Regulator - Window - Less Motor; Window Regulator, Front Right
- Manufacturer Note: Less Motor
- Position: Front Passenger Side
- Base No.: <23208
- Item Weight: 9.40 Pounds
- Item Dimensions: 25.5 x 4.4 x 31.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8A8Z-7423208-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Flex Window Regulator, Rear Driver Side Part Number: 8A8Z-7427009-A
$100.00 MSRP: $158.80You Save: $58.80 (38%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Regulator - Window - Less Motor; Window Regulator, Rear Left
- Position: Rear Driver Side
- Base No.: <27008
- Item Weight: 4.60 Pounds
- Item Dimensions: 7.4 x 16.5 x 23.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8A8Z-7427009-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Flex Window Regulator, Front Driver Side Part Number: 8A8Z-7423209-A
$130.06 MSRP: $214.00You Save: $83.94 (40%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Regulator - Window - Less Motor; Window Regulator, Front Left
- Manufacturer Note: Less Motor
- Position: Front Driver Side
- Base No.: <23208
- Item Weight: 9.40 Pounds
- Item Dimensions: 27.2 x 4.7 x 31.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8A8Z-7423209-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Flex Window Regulator, Rear Passenger Side Part Number: 8A8Z-7427008-A
$100.00 MSRP: $158.80You Save: $58.80 (38%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Regulator - Window - Less Motor; Window Regulator, Rear Right
- Position: Rear Passenger Side
- Base No.: <27008
- Item Weight: 4.70 Pounds
- Item Dimensions: 7.1 x 17.0 x 24.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8A8Z-7427008-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Flex Window Regulator
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Flex Window Regulator available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Flex Window Regulator as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Ford Flex Window Regulator Parts Q&A
- Q: How to service the front door window regulator and power window motor on 2009 Ford Flex?A: The service procedure of front door window motors requires de-initialization of the LF window motor in three situations; when the motor leaves the window regulator drum housing, after new window regulator installation, or when installing new window glass or top run, or when lubricating the window regulator or glass run. The customer should start by uninstalling the window control switch before the front door speaker and should set the water shield to the side. Install only the window control switch temporarily to let the window glass down while you access the locking tabs of the glass-to-regulator clamp. A suitable tool enables you to press each locking tab while lifting the glass upwards to separate it from the regulator clamp easily. To achieve proper clamping the glass should be pressed downward until it generates an audible notification that demonstrates correct seating. Begin by taping the window at its highest position before disconnecting the motor electrical connector and removing the fasteners and motor assembly while tightening the fasteners to 11 Nm (97 lb-in). The reverse removal steps must be used for installation alongside new LF window regulator and motor initializations but the original LF window motor will need to be both de-initialized then initialized.