How to service and repair the gearshift cables on 2009 Ford Fusion?

Begin repair or service of gearshift cables by removing first the heater core and evaporator core housing before removing the battery tray. Pull the spring clip out smoothly from the shift mechanism groove until it rotates to 90 degrees upward position. Disconnect the gearshift cables from their bracket by applying light force to the retaining part to prevent any structural damage. First separate the Restraints Control Module (RCM) by taking out the gearshift cable clamp along with the clamp nut. Place the insulation blanket to the side before removing the two gearshift cable nuts to separate cables from the floor but tighten them to 8 Nm (71 lb-in) when reinstalling. You should disconnect the cable from the shift lever assembly with careful execution to protect the retainers while drawing the shift cables through the bulkhead into the interior. Before moving the gearshift cables through the dash panel observe that the grommet arrow faces upward and follow the exact steps in reverse order after making any desired gearshift cable adjustments.

OEM 2009 Ford Fusion Shift Cable

Transmission Shift Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Shift Cables found

View related parts
2009 Ford Fusion Shift Control Cable Part Number: AE5Z-7E395-G
$91.94 MSRP: $133.83
You Save: $41.89 (32%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Selector Lever Control; Automatic Transmission Shifter Cable; Cable
- Replaces: 6E5Z-7E395-EA, AE5Z-7E395-E
- Base No.: 7E395
- Item Weight: 2.10 Pounds
- Item Dimensions: 18.9 x 14.7 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AE5Z-7E395-G
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Fusion Submodels:
- S, SE, SEL, Sport | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Ford Fusion Shift Control Cable Part Number: 6E5Z-7E395-D
$121.67 MSRP: $177.10
You Save: $55.43 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Selector Lever Control
- Replaces: 6E5Z-7E395-B
- Base No.: 7E395
- Item Weight: 5.20 Pounds
- Item Dimensions: 32.6 x 9.7 x 7.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6E5Z-7E395-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Fusion Submodels:
- S, SE, SEL | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
2009 Ford Fusion Shift Control Cable Part Number: 6E5Z-7E395-E
Product Specifications
- Other Name: Cable Assembly - Selector Lever Control; Automatic Transmission Shifter Cable; Cable
- Replaces: 6E5Z-7E395-A
- Base No.: 7E395
- Item Weight: 2.70 Pounds
- Item Dimensions: 17.5 x 17.3 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6E5Z-7E395-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Fusion Submodels:
- S, SE, SEL | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS

2009 Ford Fusion Shift Cable

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Fusion Shift Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Fusion Shift Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Fusion Shift Cable Parts Q&A

Q: How to service and repair the gearshift cables on 2009 Ford Fusion?
A: Begin repair or service of gearshift cables by removing first the heater core and evaporator core housing before removing the battery tray. Pull the spring clip out smoothly from the shift mechanism groove until it rotates to 90 degrees upward position. Disconnect the gearshift cables from their bracket by applying light force to the retaining part to prevent any structural damage. First separate the Restraints Control Module (RCM) by taking out the gearshift cable clamp along with the clamp nut. Place the insulation blanket to the side before removing the two gearshift cable nuts to separate cables from the floor but tighten them to 8 Nm (71 lb-in) when reinstalling. You should disconnect the cable from the shift lever assembly with careful execution to protect the retainers while drawing the shift cables through the bulkhead into the interior. Before moving the gearshift cables through the dash panel observe that the grommet arrow faces upward and follow the exact steps in reverse order after making any desired gearshift cable adjustments.