FordParts
My Garage
My Account
Cart
OEM 2009 Ford Mustang A/C Hose
Air Conditioning Hose- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
6 A/C Hoses found
2009 Ford Mustang A/C Hoses, Front Part Number: 4R3Z-19835-AB
$64.12 MSRP: $101.82You Save: $37.70 (38%)Product Specifications- Other Name: Tube Assembly; A/C Pipe, Front; A/C Refrigerant Liquid Hose; A/C Hose; Front A/C Hose
- Position: Front
- Base No.: 19835B
- Item Weight: 4.10 Pounds
- Item Dimensions: 27.3 x 20.4 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4R3Z-19835-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Mustang Inlet Tube Part Number: 7R3Z-19D734-A
Product Specifications- Other Name: Tube Assembly; A/C Refrigerant Liquid Hose; A/C Hose
- Manufacturer Note: Outlet Tube
- Base No.: 19D734A
- Item Weight: 0.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7R3Z-19D734-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Mustang A/C Hoses Part Number: 7R3Z-19D742-A
Product Specifications- Other Name: Tube Assembly; A/C Refrigerant Suction Hose; A/C Refrigerant Liquid Hose; A/C Hose; Outlet Hose
- Manufacturer Note: Outlet Tube
- Base No.: 19D742
- Item Weight: 1.00 Pounds
- Item Dimensions: 9.2 x 21.8 x 53.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7R3Z-19D742-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Mustang A/C Hoses Part Number: 7R3Z-19972-A
Product Specifications- Other Name: Tube Assembly; A/C Refrigerant Discharge Hose; A/C Refrigerant Liquid Hose; A/C Hose; Inlet Hose
- Manufacturer Note: Inlet Tube
- Base No.: 19972
- Item Weight: 1.10 Pounds
- Item Dimensions: 5.7 x 10.2 x 37.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7R3Z-19972-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Mustang A/C Hoses, Rear Part Number: 7R3Z-19835-A
Product Specifications- Other Name: Tube Assembly; A/C Refrigerant Suction Hose; A/C Pipe, Rear; A/C Refrigerant Liquid Hose; A/C Hose; Rear A/C Hose
- Position: Rear
- Base No.: 19835A
- Item Weight: 7.60 Pounds
- Item Dimensions: 42.0 x 20.2 x 11.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7R3Z-19835-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Mustang A/C Hoses Part Number: 6R3Z-19D734-BA
Product Specifications- Other Name: Tube - Compressor To Manifold; A/C Pipe; A/C Refrigerant Liquid Hose; A/C Hose; Tube Assembly
- Replaces: 4R3Z-19D734-BA
- Base No.: 19D734
- Item Weight: 2.80 Pounds
- Item Dimensions: 14.3 x 7.4 x 46.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6R3Z-19D734-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Mustang A/C Hose
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Mustang A/C Hose available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Mustang A/C Hose as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Ford Mustang A/C Hose Parts Q&A
- Q: How to Service and Repair the A/C Hose for the Compressor Manifold and Tube Assembly on a 4.0L Engine on 2009 Ford Mustang?A: The first step for servicing the 4.0L engine compressor manifold and tube assembly involves recovering the refrigerant. Detach the compressor manifold by rotating the bolt while removing the O-ring seals which will be disposed. During reinstallation maintain the bolt torque at 21 Nm (15 lb-ft). After you remove the compressor manifold and tube bracket nut apply a torque of 25 Nm before tightening it to 25 Nm. Activation of the suction accumulator outlet fitting requires disconnecting its electrical connector alongside pressure transducer connector while discarding all O-ring seals. The inlet fitting nut on the condenser should be removed to disconnect the fitting along with the disposal of its O-ring seal, then secure the fitting at 8 Nm (71 lb-in) tension during reassembly. The installation requires a reverse of the removal process through the use of new O-ring seals accompanied by precise PAG oil lubrication of the refrigerant system. The refrigerant system completion follows evacuation then leak testing and adds refrigerant.