How to Service and Repair the Brake Line on 2009 Ford Mustang?

The service of brake flexible hoses necessitates only clean brake fluid from approved manufacturers with no mixing of drained fluid because fluid contamination could cause damage. Read all warning statements found on the product label and receive medical advice about emergency procedures. It is necessary to cleanse brake fluid spills from painted or plastic areas with water due to possible surface damage. Begin the work by uninstalling the brake caliper flow bolt then eliminate the existing copper washers before adding new ones and tightening the bolt to 40 Nm (30 lb-ft). The procedure calls for disconnecting the brake tube fitting from the flexible hose while tightness should be set to 17 Nm (150 lb-in) when reinstallation commences. To detach the brake flexible hose disconnect the two bracket bolts while installation requires tightening these bolts to 20 Nm (177 lb-in). The installation ends by following the reversal of removing steps and performing a brake caliper bleed.

OEM 2009 Ford Mustang Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Brake Lines found

View related parts
2009 Ford Mustang Flex Hose, Front Driver Side Part Number: 8R3Z-2078-B
$31.49 MSRP: $43.56
You Save: $12.07 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front Left; Brake Hose; Brake Line; Brake Hydraulic Hose; Hydraulic Hose
- Position: Front Driver Side
- Replaces: 7R3Z-2078-B, 6R3Z-2078-F
- Base No.: 2078
- Item Weight: 1.10 Pounds
- Item Dimensions: 9.3 x 2.7 x 8.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8R3Z-2078-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Mustang Submodels:
- Base, Bullitt, GT, Shelby GT, Shelby GT500, Shelby GT500KR | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Mustang Flex Hose, Front Passenger Side Part Number: 8R3Z-2078-D
$24.70 MSRP: $34.17
You Save: $9.47 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front Right; Brake Hose; Brake Line; Hydraulic Hose
- Position: Front Passenger Side
- Replaces: 6R3Z-2078-D, 7R3Z-2078-D
- Base No.: 2078
- Item Weight: 1.10 Pounds
- Item Dimensions: 9.7 x 2.7 x 8.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8R3Z-2078-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Mustang Submodels:
- Base, Bullitt, GT, Shelby GT, Shelby GT500, Shelby GT500KR | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Mustang Flex Hose, Rear Driver Side Part Number: 7R3Z-2A442-D
Product Specifications
- Other Name: Hose Assembly; Brake Hydraulic Hose, Rear Left; Brake Hose; Brake Line; Hydraulic Hose
- Position: Rear Driver Side
- Replaces: 6R3Z-2A442-E
- Base No.: 2A442
- Item Weight: 0.90 Pounds
- Item Dimensions: 9.8 x 1.9 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7R3Z-2A442-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Mustang Submodels:
- Base, Bullitt, GT, Shelby GT, Shelby GT500, Shelby GT500KR | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Mustang Flex Hose, Rear Passenger Side Part Number: 7R3Z-2A442-B
Product Specifications
- Other Name: Hose Assembly; Brake Hydraulic Hose, Rear Right; Brake Hose; Brake Line; Hydraulic Hose
- Position: Rear Passenger Side
- Replaces: 6R3Z-2A442-D
- Base No.: 2A442
- Item Weight: 0.80 Pounds
- Item Dimensions: 9.3 x 1.9 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7R3Z-2A442-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Mustang Submodels:
- Base, Bullitt, GT, Shelby GT, Shelby GT500, Shelby GT500KR | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Mustang Flex Hose, Rear Driver Side Part Number: 7R3Z-2A442-F
Product Specifications
- Other Name: Hose Assembly; Brake Hydraulic Hose, Rear Left; Brake Hose; Brake Line; Hydraulic Hose
- Position: Rear Driver Side
- Replaces: 6R3Z-2A442-B, 7R3Z-2A442-C
- Base No.: 2A442
- Item Weight: 1.00 Pounds
- Item Dimensions: 14.4 x 2.9 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7R3Z-2A442-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Mustang Submodels:
- Base, Bullitt, GT, Shelby GT, Shelby GT500, Shelby GT500KR | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
View related parts
2009 Ford Mustang Flex Hose, Rear Passenger Side Part Number: 7R3Z-2A442-E
Product Specifications
- Other Name: Hose Assembly; Brake Hydraulic Hose, Rear Right; Brake Hose; Brake Line; Hydraulic Hose
- Position: Rear Passenger Side
- Replaces: 7R3Z-2A442-A, 6R3Z-2A442-C
- Base No.: 2A442
- Item Weight: 1.00 Pounds
- Item Dimensions: 13.8 x 2.7 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7R3Z-2A442-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Mustang Submodels:
- Base, Bullitt, GT, Shelby GT, Shelby GT500, Shelby GT500KR | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
View related parts
2009 Ford Mustang Flex Hose, Front Passenger Side Part Number: 8R3Z-2078-H
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front Right; Brake Hose; Brake Line; Hydraulic Hose
- Position: Front Passenger Side
- Replaces: 6R3Z-2078-C, 7R3Z-2078-C, 8R3Z-2078-C, 8R3Z-2078-F
- Base No.: 2078
- Item Weight: 1.20 Pounds
- Item Dimensions: 9.8 x 2.7 x 8.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8R3Z-2078-H
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Mustang Submodels:
- Base, Bullitt, GT, Shelby GT, Shelby GT500, Shelby GT500KR | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Mustang Flex Hose, Front Driver Side Part Number: 8R3Z-2078-G
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front Left; Brake Hose; Brake Line; Hydraulic Hose
- Position: Front Driver Side
- Replaces: 7R3Z-2078-A, 6R3Z-2078-E, 8R3Z-2078-E, 8R3Z-2078-A
- Base No.: 2078
- Item Weight: 1.20 Pounds
- Item Dimensions: 9.3 x 2.8 x 9.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8R3Z-2078-G
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Mustang Submodels:
- Base, Bullitt, GT, Shelby GT, Shelby GT500, Shelby GT500KR | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS

2009 Ford Mustang Brake Line

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Mustang Brake Line available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Mustang Brake Line as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Mustang Brake Line Parts Q&A

Q: How to Service and Repair the Brake Line on 2009 Ford Mustang?
A: The service of brake flexible hoses necessitates only clean brake fluid from approved manufacturers with no mixing of drained fluid because fluid contamination could cause damage. Read all warning statements found on the product label and receive medical advice about emergency procedures. It is necessary to cleanse brake fluid spills from painted or plastic areas with water due to possible surface damage. Begin the work by uninstalling the brake caliper flow bolt then eliminate the existing copper washers before adding new ones and tightening the bolt to 40 Nm (30 lb-ft). The procedure calls for disconnecting the brake tube fitting from the flexible hose while tightness should be set to 17 Nm (150 lb-in) when reinstallation commences. To detach the brake flexible hose disconnect the two bracket bolts while installation requires tightening these bolts to 20 Nm (177 lb-in). The installation ends by following the reversal of removing steps and performing a brake caliper bleed.