How to Service and Repair the Rear Brake Line Flexible Hose in the Disc Brake System on 2008 Ford Mustang?

Start the process of repairing the rear brake flexible hose in the disc brake system by taking off the tire together with the wheel. Start by removing the brake caliper flow bolt while you discard both copper washers before installing the bolt correctly at a torque of 40 Nm (30 lb-ft). The brake tube fitting on brake flexible hose must be disconnected for installation with torque set to 17 Nm (13 lb-ft). For removing the brake hose, disconnect the bracket bolt first and then reinstall it at 15 Nm (11 lb-ft). To finish the service you should reverse the steps and next bleed the brake caliper. The use of manufacturer-approved brake fluid that comes from a new container stands as essential for brake system maintenance because using recycled fluid or impure fluids can cause harm to the system. It is important to be cautious when working with brake fluid to avoid contact with painted or plastic areas because this could result in damage to the materials. In case fluid spills occur you must wash the affected spots right away with water. Emergency medical details concerning Ford/Motorcraft products can be obtained by contacting 1-800-959-3673 in USA/Canada while the product Material Safety Data Sheet (MSDS) provides supplemental information if present.

OEM 2008 Ford Mustang Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Brake Lines found

View related parts
2008 Ford Mustang Flex Hose, Front Driver Side Part Number: 8R3Z-2078-B
$31.49 MSRP: $43.56
You Save: $12.07 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front Left; Brake Hose; Brake Line; Brake Hydraulic Hose; Hydraulic Hose
- Position: Front Driver Side
- Replaces: 7R3Z-2078-B, 6R3Z-2078-F
- Base No.: 2078
- Item Weight: 1.10 Pounds
- Item Dimensions: 9.3 x 2.7 x 8.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8R3Z-2078-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Mustang Submodels:
- Base, Bullitt, GT, Shelby GT, Shelby GT500, Shelby GT500KR | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2008 Ford Mustang Flex Hose, Front Passenger Side Part Number: 8R3Z-2078-D
$24.70 MSRP: $34.17
You Save: $9.47 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front Right; Brake Hose; Brake Line; Hydraulic Hose
- Position: Front Passenger Side
- Replaces: 6R3Z-2078-D, 7R3Z-2078-D
- Base No.: 2078
- Item Weight: 1.10 Pounds
- Item Dimensions: 9.7 x 2.7 x 8.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8R3Z-2078-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Mustang Submodels:
- Base, Bullitt, GT, Shelby GT, Shelby GT500, Shelby GT500KR | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2008 Ford Mustang Flex Hose, Rear Driver Side Part Number: 7R3Z-2A442-D
Product Specifications
- Other Name: Hose Assembly; Brake Hydraulic Hose, Rear Left; Brake Hose; Brake Line; Hydraulic Hose
- Position: Rear Driver Side
- Replaces: 6R3Z-2A442-E
- Base No.: 2A442
- Item Weight: 0.90 Pounds
- Item Dimensions: 9.8 x 1.9 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7R3Z-2A442-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Mustang Submodels:
- Base, Bullitt, GT, Shelby GT, Shelby GT500, Shelby GT500KR | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2008 Ford Mustang Flex Hose, Rear Passenger Side Part Number: 7R3Z-2A442-B
Product Specifications
- Other Name: Hose Assembly; Brake Hydraulic Hose, Rear Right; Brake Hose; Brake Line; Hydraulic Hose
- Position: Rear Passenger Side
- Replaces: 6R3Z-2A442-D
- Base No.: 2A442
- Item Weight: 0.80 Pounds
- Item Dimensions: 9.3 x 1.9 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7R3Z-2A442-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Mustang Submodels:
- Base, Bullitt, GT, Shelby GT, Shelby GT500, Shelby GT500KR | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2008 Ford Mustang Flex Hose, Rear Driver Side Part Number: 7R3Z-2A442-F
Product Specifications
- Other Name: Hose Assembly; Brake Hydraulic Hose, Rear Left; Brake Hose; Brake Line; Hydraulic Hose
- Position: Rear Driver Side
- Replaces: 6R3Z-2A442-B, 7R3Z-2A442-C
- Base No.: 2A442
- Item Weight: 1.00 Pounds
- Item Dimensions: 14.4 x 2.9 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7R3Z-2A442-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Mustang Submodels:
- Base, Bullitt, GT, Shelby GT, Shelby GT500, Shelby GT500KR | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
View related parts
2008 Ford Mustang Flex Hose, Rear Passenger Side Part Number: 7R3Z-2A442-E
Product Specifications
- Other Name: Hose Assembly; Brake Hydraulic Hose, Rear Right; Brake Hose; Brake Line; Hydraulic Hose
- Position: Rear Passenger Side
- Replaces: 7R3Z-2A442-A, 6R3Z-2A442-C
- Base No.: 2A442
- Item Weight: 1.00 Pounds
- Item Dimensions: 13.8 x 2.7 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7R3Z-2A442-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Mustang Submodels:
- Base, Bullitt, GT, Shelby GT, Shelby GT500, Shelby GT500KR | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
View related parts
2008 Ford Mustang Flex Hose, Front Passenger Side Part Number: 8R3Z-2078-H
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front Right; Brake Hose; Brake Line; Hydraulic Hose
- Position: Front Passenger Side
- Replaces: 6R3Z-2078-C, 7R3Z-2078-C, 8R3Z-2078-C, 8R3Z-2078-F
- Base No.: 2078
- Item Weight: 1.20 Pounds
- Item Dimensions: 9.8 x 2.7 x 8.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8R3Z-2078-H
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Mustang Submodels:
- Base, Bullitt, GT, Shelby GT, Shelby GT500, Shelby GT500KR | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2008 Ford Mustang Flex Hose, Front Driver Side Part Number: 8R3Z-2078-G
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front Left; Brake Hose; Brake Line; Hydraulic Hose
- Position: Front Driver Side
- Replaces: 7R3Z-2078-A, 6R3Z-2078-E, 8R3Z-2078-E, 8R3Z-2078-A
- Base No.: 2078
- Item Weight: 1.20 Pounds
- Item Dimensions: 9.3 x 2.8 x 9.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8R3Z-2078-G
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Mustang Submodels:
- Base, Bullitt, GT, Shelby GT, Shelby GT500, Shelby GT500KR | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS

2008 Ford Mustang Brake Line

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Mustang Brake Line available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Mustang Brake Line as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Mustang Brake Line Parts Q&A

Q: How to Service and Repair the Rear Brake Line Flexible Hose in the Disc Brake System on 2008 Ford Mustang?
A: Start the process of repairing the rear brake flexible hose in the disc brake system by taking off the tire together with the wheel. Start by removing the brake caliper flow bolt while you discard both copper washers before installing the bolt correctly at a torque of 40 Nm (30 lb-ft). The brake tube fitting on brake flexible hose must be disconnected for installation with torque set to 17 Nm (13 lb-ft). For removing the brake hose, disconnect the bracket bolt first and then reinstall it at 15 Nm (11 lb-ft). To finish the service you should reverse the steps and next bleed the brake caliper. The use of manufacturer-approved brake fluid that comes from a new container stands as essential for brake system maintenance because using recycled fluid or impure fluids can cause harm to the system. It is important to be cautious when working with brake fluid to avoid contact with painted or plastic areas because this could result in damage to the materials. In case fluid spills occur you must wash the affected spots right away with water. Emergency medical details concerning Ford/Motorcraft products can be obtained by contacting 1-800-959-3673 in USA/Canada while the product Material Safety Data Sheet (MSDS) provides supplemental information if present.