How to Remove and Replace the Drive Shaft on a 4.0L on 2009 Ford Mustang?

Your first step to replace or remove the driveshaft of a 4.0L vehicle involves placing it in neutral position on a hoist. You should make index marks on the driveshaft to maintain correct position but you should remove and discard the eight driveshaft flange bolts. New bolts must be used for installation where you should follow a cross pattern prior to tightening them to 103 Nm (76 lb-ft). The driveshaft and its components must not receive hammer impacts during disconnection of flanges from pilots because a proper tool should be used only in the marked application space to release the flanges. The removal operation begins when you disconnect the driveshaft flanges after which you take out the driveshaft. To reinstall properly position the driveshaft flanges directly onto the pinion flange pilots before evenly tightening their bolts through a cross pattern system.

OEM 2009 Ford Mustang Drive Shaft

Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Drive Shafts found

View related parts
2009 Ford Mustang Drive Shaft Part Number: BR3Z-4R602-H
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Replaces: BR3Z-4R602-B, 7R3Z-4R602-C, 9R3Z-4R602-A
- Base No.: 4R602
- Item Weight: 46.00 Pounds
- Item Dimensions: 9.5 x 75.3 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BR3Z-4R602-H
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Mustang Submodels:
- Shelby GT500, Shelby GT500KR | 8 Cyl 5.4 L GAS
View related parts
2009 Ford Mustang Drive Shaft Part Number: 8R3Z-4602-B
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Replaces: 7R3Z-4602-A, 4R3Z-4602-BA, 6R3Z-4602-B
- Base No.: 4602
- Item Weight: 42.40 Pounds
- Item Dimensions: 57.6 x 11.7 x 7.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8R3Z-4602-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Mustang Submodels:
- Base, GT, Shelby GT500 | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Mustang Drive Shaft Part Number: 8R3Z-4602-A
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Replaces: 4R3Z-4602-AA, 6R3Z-4602-A
- Base No.: 4602
- Item Weight: 34.00 Pounds
- Item Dimensions: 67.9 x 11.3 x 8.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8R3Z-4602-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Mustang Submodels:
- Base, GT, Shelby GT500 | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Mustang Drive Shaft Part Number: 9R3Z-4R602-AA
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Replaces: 6R3Z-4R602-C, 8R3Z-4R602-A
- Base No.: 3B413
- Item Weight: 46.90 Pounds
- Item Dimensions: 67.9 x 11.5 x 8.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9R3Z-4R602-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Mustang Submodels:
- Bullitt, GT, Shelby GT, Shelby GT500, Shelby GT500KR | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS

2009 Ford Mustang Drive Shaft

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Mustang Drive Shaft available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Mustang Drive Shaft as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Mustang Drive Shaft Parts Q&A

Q: How to Remove and Replace the Drive Shaft on a 4.0L on 2009 Ford Mustang?
A: Your first step to replace or remove the driveshaft of a 4.0L vehicle involves placing it in neutral position on a hoist. You should make index marks on the driveshaft to maintain correct position but you should remove and discard the eight driveshaft flange bolts. New bolts must be used for installation where you should follow a cross pattern prior to tightening them to 103 Nm (76 lb-ft). The driveshaft and its components must not receive hammer impacts during disconnection of flanges from pilots because a proper tool should be used only in the marked application space to release the flanges. The removal operation begins when you disconnect the driveshaft flanges after which you take out the driveshaft. To reinstall properly position the driveshaft flanges directly onto the pinion flange pilots before evenly tightening their bolts through a cross pattern system.