FordParts
My Garage
My Account
Cart
OEM 2009 Ford Ranger Torsion Bar
Suspension Torsion Bar- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
6 Torsion Bars found
2009 Ford Ranger Torsion Bar, Front Driver Side Part Number: F57Z-5B327-A
$146.10 MSRP: $212.67You Save: $66.57 (32%)Product Specifications- Other Name: Bar - Torsion; Torsion Bar, Front Left
- Position: Front Driver Side
- Base No.: 5B326
- Item Weight: 13.30 Pounds
- Item Dimensions: 49.9 x 5.3 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F57Z-5B327-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Ranger Torsion Bar, Front Driver Side Part Number: F67Z-5B326-FB
$151.14 MSRP: $220.00You Save: $68.86 (32%)Product Specifications- Other Name: Bar - Torsion; Torsion Bar, Front Left
- Position: Front Driver Side
- Base No.: 5B326
- Item Weight: 14.60 Pounds
- Item Dimensions: 5.2 x 5.3 x 48.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F67Z-5B326-FB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Bar - Torsion; Torsion Bar, Front Right
- Position: Front Passenger Side
- Base No.: 5B326
- Item Weight: 11.80 Pounds
- Item Dimensions: 5.1 x 5.2 x 49.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F57Z-5B326-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Bar - Torsion; Torsion Bar, Front Right
- Position: Front Passenger Side
- Base No.: 5B326
- Item Weight: 15.20 Pounds
- Item Dimensions: 49.0 x 4.0 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F67Z-5B326-FA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Ranger Torsion Bar, Passenger Side Part Number: F57Z-5B326-E
Product Specifications- Other Name: Bar - Torsion
- Position: Passenger Side
- Base No.: 5B326
- Item Weight: 7.70 Pounds
- Item Dimensions: 5.3 x 5.2 x 48.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F57Z-5B326-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Ranger Torsion Bar, Driver Side Part Number: F57Z-5B327-E
Product Specifications- Other Name: Bar - Torsion
- Position: Driver Side
- Base No.: 5B326
- Item Weight: 11.30 Pounds
- Item Dimensions: 5.3 x 5.3 x 48.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F57Z-5B327-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Ranger Torsion Bar
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Ranger Torsion Bar available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Ranger Torsion Bar as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Ford Ranger Torsion Bar Parts Q&A
- Q: How to service and repair the torsion bar on 2009 Ford Ranger?A: The vehicle should be placed on a hoist in neutral position before starting any work on the torsion bar. Replace the torsion bar cover plate bolts and remove the cover plate before resettling the bolts to 55 Nm (41 lb-ft) when reattaching it. Take a measurement of the adjustment bolt length before removing torsion bar tension because this measurement will be needed to set up the new bolt. Apply the torsion bar remover/installer along with the adapter to relieve tension before tightening until the adjuster separates from the adjustment bolt. The adjustment bolt with dry adhesive requires replacement after removal because it avoids loosening and misalignment. First remove both the old adjustment bolt along with the support nut before opening the tension using the remover/installer. To remove the torsion bar start by marking both components before uninstalling the insulator plate then pulling the bar out from the lower arm. Install the torsion bar by first inserting it into the lower arm then match the marks between the bar and adjuster before installing both pieces and the insulator plate. Instillation of the adjustment bolt becomes necessary when it required removal or backoff during maintenance. The torsion bar preloading process demands the insertion of the remover/installer followed by torque adjustments to enable new bolt and nut installation. Finally, rotate the adjustment bolt to match the original bolt length. After installation of the cover plate with bolts to a torque of 55 Nm (41 lb-ft), conduct ride height adjustments and check the necessary front end alignment.