How to remove and replace the rear bumper cover on 2009 Ford Taurus X?

Place the Taurus X in NEUTRAL position on a hoist before undertaking bumper cover replacement on the rear section. To start the process of removing and replacing the rear bumper cover first remove the rear lamps eliminating any need to disconnect the parking aid system only if it exists. The first step is to remove 5 rear bumper cover scrivets situated at the liftgate opening and the 2 rear bumper cover pin-type retainers at the beam's base. Customers need to take out two bolts that are placed one each side of the wheel lip molding located along the vehicle's underside. You need to lift the rear bumper cover slightly before it will come loose from the body at its forward outboard position. Check the mounting reinforcements for damage after bumper removal and perform necessary replacements. The installation process ends with returning the bumper cover according to the reverse procedure.

OEM 2009 Ford Taurus X Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Bumpers found

View related parts
2009 Ford Taurus X Lower Cover, Rear
Part Number: 8F9Z-17K835-AAPTM
$368.43 MSRP: $509.69
You Save: $141.26 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear Lower
- Manufacturer Note: Prime, Paint To Match - Reference TSB 03-10-1
- Position: Rear Lower
- Base No.: 17K835
- Item Weight: 15.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8F9Z-17K835-AAPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Taurus X Submodels:
- Eddie Bauer, Limited, SEL | 6 Cyl 3.5 L GAS
View related parts
2009 Ford Taurus X Impact Bar, Rear
Part Number: 5F9Z-17906-AA
$154.53 MSRP: $213.78
You Save: $59.25 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Impact Bar, Rear
- Position: Rear
- Base No.: 17906
- Item Weight: 37.60 Pounds
- Item Dimensions: 51.0 x 5.3 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5F9Z-17906-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Taurus X Submodels:
- Eddie Bauer, Limited, SEL | 6 Cyl 3.5 L GAS
View related parts
2009 Ford Taurus X Impact Bar, Front
Part Number: 8F9Z-17757-A
$228.11 MSRP: $315.56
You Save: $87.45 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Impact Bar, Front
- Manufacturer Note: Impact Bar - Steel
- Position: Front
- Replaces: 5F9Z-17757-AA
- Base No.: 17757
- Item Weight: 16.50 Pounds
- Item Dimensions: 6.4 x 58.0 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8F9Z-17757-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Taurus X Submodels:
- Eddie Bauer, Limited, SEL | 6 Cyl 3.5 L GAS
View related parts
2009 Ford Taurus X Bumper Cover, Front Upper
Part Number: 8F9Z-17D957-CAPTM
$327.06 MSRP: $480.27
You Save: $153.21 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front Upper
- Base No.: 17D957B
- Item Weight: 15.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8F9Z-17D957-CAPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Taurus X Submodels:
- Eddie Bauer, Limited, SEL | 6 Cyl 3.5 L GAS
View related parts
2009 Ford Taurus X Lower Cover, Rear
Part Number: 8F9Z-17K835-BAPTM
Product Specifications
- Other Name: Cover; Bumper Cover, Rear Lower
- Manufacturer Note: Prime, Paint To Match - Reference TSB 03-10-1
- Position: Rear Lower
- Base No.: 17K835
- Item Weight: 15.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8F9Z-17K835-BAPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Taurus X Submodels:
- Eddie Bauer, Limited, SEL | 6 Cyl 3.5 L GAS
View related parts
2009 Ford Taurus X Lower Cover, Front
Part Number: 8F9Z-17D957-AAPTM
$164.01 MSRP: $238.73
You Save: $74.72 (32%)
Product Specifications
- Other Name: Bumper Assembly - Front; Valance Panel, Front
- Position: Front Lower
- Base No.: 17D957A
- Item Weight: 15.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8F9Z-17D957-AAPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Taurus X Submodels:
- Eddie Bauer, Limited, SEL | 6 Cyl 3.5 L GAS

2009 Ford Taurus X Bumper

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Taurus X Bumper available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Taurus X Bumper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Taurus X Bumper Parts Questions & Experts Answers

Q: How to remove and replace the rear bumper cover on 2009 Ford Taurus X?
A: Place the Taurus X in NEUTRAL position on a hoist before undertaking bumper cover replacement on the rear section. To start the process of removing and replacing the rear bumper cover first remove the rear lamps eliminating any need to disconnect the parking aid system only if it exists. The first step is to remove 5 rear bumper cover scrivets situated at the liftgate opening and the 2 rear bumper cover pin-type retainers at the beam's base. Customers need to take out two bolts that are placed one each side of the wheel lip molding located along the vehicle's underside. You need to lift the rear bumper cover slightly before it will come loose from the body at its forward outboard position. Check the mounting reinforcements for damage after bumper removal and perform necessary replacements. The installation process ends with returning the bumper cover according to the reverse procedure.