FordParts
My Garage
My Account
Cart
OEM 2009 Ford Taurus X Exhaust Manifold
Engine Exhaust Manifold- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Exhaust Manifolds found
2009 Ford Taurus X Exhaust Manifold, Passenger Side Part Number: 7T4Z-9430-C
$64.01 MSRP: $93.17You Save: $29.16 (32%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Right; Manifold
- Position: Passenger Side
- Base No.: 9430
- Item Weight: 8.80 Pounds
- Item Dimensions: 16.2 x 8.2 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7T4Z-9430-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Taurus X Exhaust Manifold, Driver Side Part Number: 7T4Z-9431-C
$62.42 MSRP: $86.35You Save: $23.93 (28%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Left; Manifold
- Position: Driver Side
- Replaces: 7T4Z-9431-B
- Base No.: 9430B
- Item Weight: 10.10 Pounds
- Item Dimensions: 7.5 x 7.3 x 14.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7T4Z-9431-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Taurus X Exhaust Manifold
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Taurus X Exhaust Manifold available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Taurus X Exhaust Manifold as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Ford Taurus X Exhaust Manifold Parts Q&A
- Q: How to remove and replace the right-hand exhaust manifold on 2009 Ford Taurus X?A: The removal process for the right-hand (RH) exhaust manifold demands initial steps of catalytic converter extraction and disconnected Heated Oxygen Sensor (HO2S) electrical connection. The next step requires you to detach six nuts holding the RH exhaust manifold in place while discarding the nuts as well as the gasket. Begin by cleaning the RH exhaust manifold followed by a stud removal process of its six components which leads to disposal. The sealing surfaces require cleaning with a plastic scraper from which metal scrapers and wire brushes and abrasive tools must be avoided due to their potential to create leaking defects. Follow the packaging instructions to perform metal surface prep on the exhaust manifold mating surface of the cylinder head. Follow this installation procedure by using six new RH exhaust manifold studs that need to be tightened to 12 Nm (106 lb-in). The process of exhaust leak prevention requires two-stage torque tightening of new exhaust manifold nuts beginning with a torque of 20 Nm (177 lb-in) followed by a torque of 25 Nm (18 lb-ft). Install the RH exhaust manifold first using a new gasket before the torque sequence starts. The RH HO2S electrical connector needs to be restored while the RH catalytic converter must be installed.