How to service and repair the battery cables on 2009 Lincoln MKX?

To maintain the battery cables, pull the battery tray and nuts out of the ground terminal and the Battery Junction Box, and screw it into place, with a tightening of 9 Nm. Take off the starter solenoid terminal cover and nuts and connect tight to 12 Nm. Lastly, unscrew the generator B+ connection, but screw tightly 17 Nm on reinstatement.

OEM 2009 Lincoln MKX Battery Cable

Car Battery Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Battery Cable found

View related parts
2009 Lincoln MKX Battery Cable Part Number: 9T4Z-14300-AA
Product Specifications
- Other Name: Cable Assembly - Battery To Battery; Battery Cables; Positive Cable
- Manufacturer Note: Complete Asy., Includes Positive & Negative Battery Cables And A/C, Alternator & Starter Motor Cables
- Base No.: 14300
- Item Weight: 6.50 Pounds
- Item Dimensions: 18.2 x 17.9 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9T4Z-14300-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Lincoln MKX Submodels:
- Base | 6 Cyl 3.5 L GAS

2009 Lincoln MKX Battery Cable

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Lincoln MKX Battery Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Lincoln MKX Battery Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Lincoln MKX Battery Cable Parts Q&A

Q: How to service and repair the battery cables on 2009 Lincoln MKX?
A: To maintain the battery cables, pull the battery tray and nuts out of the ground terminal and the Battery Junction Box, and screw it into place, with a tightening of 9 Nm. Take off the starter solenoid terminal cover and nuts and connect tight to 12 Nm. Lastly, unscrew the generator B+ connection, but screw tightly 17 Nm on reinstatement.