How to Service and Repair the Differential Cover on 2009 Lincoln MKX?

In order to fix the differential housing cover, it is important to make sure that the vehicle is in neutral in a hoist. Take off the 10 bolts, empty the fluid and clean up surfaces. Pipe on silicone rubber and put the cover inside in 15 minutes and leave to cure an hour. Add 1.15L lubricant and screw the filler plug back in place.

OEM 2009 Lincoln MKX Differential Cover

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Differential Cover found

View related parts
2009 Lincoln MKX Differential Cover, Rear Part Number: 7E5Z-4033-A
$88.04 MSRP: $128.15
You Save: $40.11 (32%)
ADD TO CART
Product Specifications
- Other Name: Cover - Rear Axle Housing; Differential Cover, Rear; Axle Cover; Rear Cover; Differential Assy Cover; Cover
- Position: Rear
- Base No.: 4033
- Item Weight: 4.40 Pounds
- Item Dimensions: 10.2 x 10.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7E5Z-4033-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Lincoln MKX Submodels:
- Base | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS

2009 Lincoln MKX Differential Cover

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Lincoln MKX Differential Cover available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Lincoln MKX Differential Cover as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Lincoln MKX Differential Cover Parts Q&A

Q: How to Service and Repair the Differential Cover on 2009 Lincoln MKX?
A: In order to fix the differential housing cover, it is important to make sure that the vehicle is in neutral in a hoist. Take off the 10 bolts, empty the fluid and clean up surfaces. Pipe on silicone rubber and put the cover inside in 15 minutes and leave to cure an hour. Add 1.15L lubricant and screw the filler plug back in place.