How to service and repair the harmonic balancer and crankshaft pulley on 2009 Lincoln Navigator?

To work on the harmonic balancer and the crankshaft pulley, lift the vehicle in neutral. Take out the cooling fan, and the accessory drive belt. Removal of the crankshaft pulley with the help of a 3-jaw puller. Sealant, fit the pulley and tighten the bolt sequentially. Install the cooling fan and the belt again.

OEM 2009 Lincoln Navigator Harmonic Balancer

Engine Harmonic Balancer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Harmonic Balancer found

View related parts
2009 Lincoln Navigator Crankshaft Pulley Part Number: 7L3Z-6312-A
$108.73 MSRP: $158.27
You Save: $49.54 (32%)
Product Specifications
- Other Name: Pulley - Crankshaft; Engine Crankshaft Pulley; Harmonic Balancer; Vibration Damper; Pulley
- Replaces: 2L1Z-6312-AA, 2L7Z-6312-A, 7L3Z-6312-B, 2L7Z-6312-AA, 5L3Z-6312-AA
- Base No.: 6312
- Item Weight: 4.20 Pounds
- Item Dimensions: 7.8 x 8.1 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L3Z-6312-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Lincoln Navigator Submodels:
- Base, L, L Luxury, L Ultimate, Luxury, Ultimate | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS

2009 Lincoln Navigator Harmonic Balancer

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Lincoln Navigator Harmonic Balancer available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Lincoln Navigator Harmonic Balancer as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Lincoln Navigator Harmonic Balancer Parts Q&A

Q: How to service and repair the harmonic balancer and crankshaft pulley on 2009 Lincoln Navigator?
A: To work on the harmonic balancer and the crankshaft pulley, lift the vehicle in neutral. Take out the cooling fan, and the accessory drive belt. Removal of the crankshaft pulley with the help of a 3-jaw puller. Sealant, fit the pulley and tighten the bolt sequentially. Install the cooling fan and the belt again.