FordParts
My Garage
My Account
Cart
OEM 2009 Lincoln Navigator Trunk Lid Lift Support
Lift Strut Rod- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Trunk Lid Lift Supports found
2009 Lincoln Navigator Lift Cylinder, Passenger Side Part Number: 9L7Z-78406A10-A
$39.98 MSRP: $57.20You Save: $17.22 (31%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Lift Assembly - Gas; Back Glass, Liftgate, Tailgate, and Door Lift Support.; Support Cylinder
- Position: Passenger Side
- Replaces: 2L7Z-78406A10-AA, 7L7Z-78406A10-A
- Base No.: <406A10
- Item Weight: 1.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L7Z-78406A10-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Lincoln Navigator Lift Cylinder, Driver Side Part Number: 9L7Z-78406A11-A
$40.69 MSRP: $58.22You Save: $17.53 (31%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Lift Assembly - Gas; Back Glass, Liftgate, Tailgate, and Door Lift Support.; Support Cylinder
- Position: Driver Side
- Replaces: 7L7Z-78406A11-A, 2L7Z-78406A11-AA
- Base No.: <406A10
- Item Weight: 1.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L7Z-78406A11-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Lincoln Navigator Trunk Lid Lift Support
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Lincoln Navigator Trunk Lid Lift Support available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Lincoln Navigator Trunk Lid Lift Support as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Lincoln Navigator Trunk Lid Lift Support Parts Q&A
- Q: How to service and repair the Trunk Lid Lift Support on 2009 Lincoln Navigator?A: The first step to fix the power liftgate rod involves removing the LH quarter trim panel. The service requires unclipping the power liftgate rod from the motor assembly by pressing on the clip to free it while moving it to the top of the rod assembly. Secure the retaining nut between the power liftgate rod and liftgate by applying threadlock to its threads. Then install it with 11 Nm of torque (97 lb-in). After taking out the power liftgate rod-to-bracket bolt and power liftgate rod assembly, you need to install them with a torque of 30 Nm (22 lb-ft). Conclude the repair by completing the reverse procedures followed by power liftgate landing.