Other Name: Lift Assembly - Gas; Back Glass, Liftgate, Tailgate, and Door Lift Support.; Support Cylinder
Position: Passenger Side
Replaces: 2L7Z-78406A10-AA, 7L7Z-78406A10-A
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2002-2017 Lincoln Navigator | Base, L, L Luxury, L Reserve, L Select, L Ultimate, Luxury, Reserve, Select, Ultimate | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
Other Name: Lift Assembly - Gas; Back Glass, Liftgate, Tailgate, and Door Lift Support.; Support Cylinder
Position: Driver Side
Replaces: 7L7Z-78406A11-A, 2L7Z-78406A11-AA
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2002-2017 Lincoln Navigator | Base, L, L Luxury, L Reserve, L Select, L Ultimate, Luxury, Reserve, Select, Ultimate | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
Other Name: Lift Assembly - Gas; Back Glass, Liftgate, Tailgate, and Door Lift Support.; Support Cylinder
Manufacturer Note: LH/RH
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
1998-2001 Lincoln Navigator | Base | 8 Cyl 5.4 L GAS
Lincoln Navigator Trunk Lid Lift Support
Welcome to our website where you can discover high-quality, genuine Lincoln Navigator Trunk Lid Lift Support. We offer an extensive inventory of OEM Lincoln Navigator Trunk Lid Lift Support at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.
Lincoln Navigator Trunk Lid Lift Support Parts Questions & Experts Answers
Q: How to service and repair the Trunk Lid Lift Support on Lincoln Navigator?
A: The first step to fix the power liftgate rod involves removing the LH quarter trim panel. The service requires unclipping the power liftgate rod from the motor assembly by pressing on the clip to free it while moving it to the top of the rod assembly. Secure the retaining nut between the power liftgate rod and liftgate by applying threadlock to its threads. Then install it with 11 Nm of torque (97 lb-in). After taking out the power liftgate rod-to-bracket bolt and power liftgate rod assembly, you need to install them with a torque of 30 Nm (22 lb-ft). Conclude the repair by completing the reverse procedures followed by power liftgate landing.