FordParts
My Garage
My Account
Cart
OEM 2009 Lincoln Town Car Power Steering Pump
Power Steering Pump Unit- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Power Steering Pump found
2009 Lincoln Town Car Power Steering Pump Part Number: 9W7Z-3A674-BARM
$170.54 MSRP: $278.18You Save: $107.64 (39%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Remanufactured Pump Assembly - Power Steering; Pump Assembly - Power Steering
- Replaces: 8W7Z-3A674-C, 9W7Z-3A674-B, 9W7Z-3A674-A, STP-261, STP-255, STP-229
- Base No.: 3A674
- Item Weight: 7.20 Pounds
- Item Dimensions: 6.5 x 5.5 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9W7Z-3A674-BARM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Lincoln Town Car Power Steering Pump
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Lincoln Town Car Power Steering Pump available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Lincoln Town Car Power Steering Pump as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Lincoln Town Car Power Steering Pump Parts Q&A
- Q: How to service and repair the power steering pump on 2009 Lincoln Town Car?A: A proper suction tool should be used initially to extract power steering fluid from the reservoir during power steering pump servicing. Proceed by taking off the power steering pump pulley from its position. Users should free the clamp and detach the supply hose but they must secure the pressure line bracket-to-engine nut to 8 Nm (71 lb-in) torque when reinstalling. The pressure line-to-pump fitting should be disconnected to remove the Teflon® seal before reinstallation where the fitting requires a torque of 73 Nm (54 lb-ft). Tighten the power steering pump bolts to 30 Nm (22 lb-ft) during installation while removing them initially. A proper installation of new Teflon® seals requires using the Teflon® Seal Installer Set for this application. Complete the power steering system filling procedure to finish the work.