How to Remove and Install the Blower Motor on 2009 Mercury Mariner?

To service the blower motor, unplug the electrical connector, snap the vent tube clips and lower the vent tube. Lift the carpet slightly and then turn the blower motor counterclockwise in order to remove it. Install the motor again by following the same steps, only in reverse in order to install it properly.

OEM 2009 Mercury Mariner Blower Motor

A/C Heater Blower Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blower Motor found

View related parts
2009 Mercury Mariner Blower Motor Part Number: 8L8Z-19805-C
$94.57 MSRP: $155.60
You Save: $61.03 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan And Motor Assembly; HVAC Blower Motor; Blower Assembly
- Replaces: 8L8Z-19805-B, 8L8Z-19805-A
- Base No.: 19805
- Item Weight: 4.30 Pounds
- Item Dimensions: 10.7 x 8.1 x 9.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L8Z-19805-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Mercury Mariner Submodels:
- Base, Hybrid, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

2009 Mercury Mariner Blower Motor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Mercury Mariner Blower Motor available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Mercury Mariner Blower Motor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Mercury Mariner Blower Motor Parts Q&A

Q: How to Remove and Install the Blower Motor on 2009 Mercury Mariner?
A: To service the blower motor, unplug the electrical connector, snap the vent tube clips and lower the vent tube. Lift the carpet slightly and then turn the blower motor counterclockwise in order to remove it. Install the motor again by following the same steps, only in reverse in order to install it properly.