OEM 2009 Mercury Mariner Side Marker Light

2009 Mercury Mariner Side Marker Light Parts Questions & Experts Answers

• Q: How to service the front turn signal lamp and Side Marker Light on 2009 Mercury Mariner?

  A: Service of front turn signal lamp and side lamp starts with disconnecting the electrical connector that powers the front turn signal lamp. The front turn signal lamp bulb holder needs to be rotated counterclockwise by one-eighth turn before it can be removed from the headlamp assembly to separate the bulb from its holder. The task of servicing front turn signal and side lamps requires the vehicle to be in NEUTRAL position on a hoist while removing the four fender splash shield bolts which should be tightened to 5 Nm (44 lb-in) when reinstalling. Proceed to unscrew the four pin-type retainers of the fender splash shield while also removing the screw before setting the shield aside for storage. Twist the side lamp bulb holder about one-eighth turn to the left in order to remove it from the headlamp assembly before extracting the side lamp bulb from the bulb holder. The removal procedure for both the front turn signal lamp and side lamp can be reversed to finish the process.