How to service and repair the windshield washer reservoir on 2009 Mercury Milan?

To maintain the windshield washer reservoir, lift the car in neutral, take off splash shield on RH front fender and also unplug the electrical connector of the pump. Empty the reservoir, take off the filler neck bolt, and the reservoir. Installation with fasteners clamped to 7 Nm and before starting the pump fill the reservoir.

OEM 2009 Mercury Milan Washer Reservoir

Windshield Washer Reservoir

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Washer Reservoir found

View related parts
2009 Mercury Milan Washer Pump Part Number: 6E5Z-17618-A
$50.74 MSRP: $79.18
You Save: $28.44 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Reservoir - Water; Washer Fluid Reservoir; Windshield Washer Reservoir; Windshield Washer Pump; Reservoir Assembly
- Manufacturer Note: Includes Pump
- Replaces: 6E5Z-17618-AA
- Base No.: 17618
- Item Weight: 4.10 Pounds
- Item Dimensions: 18.7 x 12.4 x 9.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6E5Z-17618-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Mercury Milan Submodels:
- Base, Premier | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

2009 Mercury Milan Washer Reservoir

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Mercury Milan Washer Reservoir available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Mercury Milan Washer Reservoir as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Mercury Milan Washer Reservoir Parts Q&A

Q: How to service and repair the windshield washer reservoir on 2009 Mercury Milan?
A: To maintain the windshield washer reservoir, lift the car in neutral, take off splash shield on RH front fender and also unplug the electrical connector of the pump. Empty the reservoir, take off the filler neck bolt, and the reservoir. Installation with fasteners clamped to 7 Nm and before starting the pump fill the reservoir.