FordParts
My Garage
My Account
Cart
OEM 2009 Mercury Mountaineer Bumper
Bumper Fascia- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Bumpers found
2009 Mercury Mountaineer Bumper Cover, Front Part Number: 6L9Z-17D957-DAPTM
$194.21 MSRP: $282.70You Save: $88.49 (32%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Base No.: 17D957
- Item Weight: 107.00 Pounds
- Item Dimensions: 89.4 x 47.3 x 22.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L9Z-17D957-DAPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Mercury Mountaineer Bumper Cover Part Number: 6L9Z-17K835-CAPTM
$287.84 MSRP: $448.35You Save: $160.51 (36%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Cover
- Base No.: 17K835
- Item Weight: 11.10 Pounds
- Item Dimensions: 87.2 x 37.6 x 23.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L9Z-17K835-CAPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Mercury Mountaineer Bumper
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Mercury Mountaineer Bumper available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Mercury Mountaineer Bumper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Mercury Mountaineer Bumper Parts Q&A
- Q: How to remove and replace the front bumper cover on 2009 Mercury Mountaineer?A: The first step to replace or remove the front bumper cover for both Explorer SUVs requires the removal of headlamp assemblies. The first step requires removal of the fog lamp electric connections and side turn signal lamp electric connections when these features are present. Remove first the screws and pin-type retainers from the front fender inner splash shields then proceed to remove the shields. Remove the two bolts anchored at the bottom section of the bumper cover. Release the front bumper cover locking tabs using a flat-blade screwdriver because you will remove the fender clips when separating the front fender on Explorer and Explorer Sport Trac models. To remove the bumper cover people must first detach the fender-to-bumper cover clips before they must take off the Mountaineer bumper cover upper screws. Gently tilt the bottom portion of the front bumper cover towards the sky while applying downward force to the upper area until the three locking tabs are freed. The removal procedure is opposite of installation so start by reinstalling the front bumper cover after completing the steps.