FordParts
My Garage
My Account
Cart
OEM 2008 Mercury Mountaineer Bumper
Bumper Fascia- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Bumpers found
2008 Mercury Mountaineer Bumper Cover, Front Part Number: 6L9Z-17D957-DAPTM
$194.21 MSRP: $282.70You Save: $88.49 (32%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Base No.: 17D957
- Item Weight: 107.00 Pounds
- Item Dimensions: 89.4 x 47.3 x 22.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L9Z-17D957-DAPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Mercury Mountaineer Bumper Cover Part Number: 6L9Z-17K835-CAPTM
$287.84 MSRP: $448.35You Save: $160.51 (36%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Cover
- Base No.: 17K835
- Item Weight: 11.10 Pounds
- Item Dimensions: 87.2 x 37.6 x 23.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L9Z-17K835-CAPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Mercury Mountaineer Bumper
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Mercury Mountaineer Bumper available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Mercury Mountaineer Bumper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Mercury Mountaineer Bumper Parts Q&A
- Q: How to remove and replace the front bumper cover on 2008 Mercury Mountaineer?A: Grounding operations for replacing the front bumper cover of the Explorer and its variants should start with headlamp assembly removal. The next procedure includes disconnecting both fog lamp electrical connections as well as side turn signal lamp electrical connections when these features are installed. Start by unscrewing and removing pin-type retainers which fasten the front fender inner splash shields before extracting both shields from their positions. At the bottom of the bumper cover remove the two bolts while also unfastening the six scrivets from the grille-to-grille opening panel. You can free the bump cover locking tabs using a flat-blade screwdriver and then remove the bumper cover-to-fender fasteners. The Mountaineer requires you to uninstall the screws situated on the top of the bumper cover. You must rotate the bottom section of the front bumper cover toward the top to free its three locking tabs through the top's application of downward pressure. The new front bumper cover installation demands you should reverse all removal steps.