How to service the Fuel Pump Driver Module (FPDM) on 2009 Mercury Mountaineer?

To replace the Fuel Pump Driver Module (FPDM) on both the Explorer and Mountaineer, loosen the trim panel of the rear quarter of the right trim panel, unplug the electrical connector and loosen the two securing bolts. Installation of the new module under consideration should be done at 10 Nm (89 lb-in) of tightness of bolts and undo the steps of installation.

OEM 2009 Mercury Mountaineer Fuel Pump Driver Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuel Pump Driver Module found

View related parts
2009 Mercury Mountaineer Module Part Number: 6L2Z-9D372-A
$117.94 MSRP: $228.89
You Save: $110.95 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Engine Fuel; Fuel Pump Housing; Fuel Pump Driver Module
- Replaced by: 5L8Z-9D370-A
- Base No.: 9D372
- Item Weight: 2.20 Pounds
- Item Dimensions: 7.7 x 7.1 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L2Z-9D372-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Mercury Mountaineer Submodels:
- Base, Premier | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS

2009 Mercury Mountaineer Fuel Pump Driver Module

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Mercury Mountaineer Fuel Pump Driver Module available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Mercury Mountaineer Fuel Pump Driver Module as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Mercury Mountaineer Fuel Pump Driver Module Parts Q&A

Q: How to service the Fuel Pump Driver Module (FPDM) on 2009 Mercury Mountaineer?
A: To replace the Fuel Pump Driver Module (FPDM) on both the Explorer and Mountaineer, loosen the trim panel of the rear quarter of the right trim panel, unplug the electrical connector and loosen the two securing bolts. Installation of the new module under consideration should be done at 10 Nm (89 lb-in) of tightness of bolts and undo the steps of installation.