My Garage
Cart

OEM Ford Contour Brake Caliper

Caliper
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Brake Calipers found

  • Ford Contour Brake Caliper - F8RZ-2553-AA
    Ford Contour Brake Caliper Diagram - F8RZ-2553-AA
    View related parts
    Product Specifications
    • Other Name: Housing
    • Manufacturer Note: LH less pads
    • Position: Driver Side
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    Fits the following Vehicles:
    • 1995-2000 Ford Contour | Base, GL, GL Sport, LX, LX Sport, SE, Sport, SVT | 4 Cyl 2.0 L BI-FUEL, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
  • Ford Contour Brake Caliper - F8RZ-2B121-EA
    Ford Contour Brake Caliper Diagram - F8RZ-2B121-EA
    View related parts
    Product Specifications
    • Other Name: Caliper Assembly - Brake; Brake Caliper Repair Kit; Brake Caliper; Caliper; Caliper Assembly - Brake - Less Pads
    • Position: Driver Side
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    Fits the following Vehicles:
    • 1995-2000 Ford Contour | Base, GL, GL Sport, LX, LX Sport, SE, Sport, SVT | 4 Cyl 2.0 L BI-FUEL, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
  • Ford Contour Brake Caliper - F8RZ-2552-AA
    Ford Contour Brake Caliper Diagram - F8RZ-2552-AA
    View related parts
    Product Specifications
    • Other Name: Housing; Brake Caliper Repair Kit; Brake Caliper; Caliper
    • Position: Passenger Side
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    Fits the following Vehicles:
    • 1995-2000 Ford Contour | Base, GL, GL Sport, LX, LX Sport, SE, Sport, SVT | 4 Cyl 2.0 L BI-FUEL, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS

Ford Contour Brake Caliper

Welcome to our website where you can discover high-quality, genuine Ford Contour Brake Caliper. We offer an extensive inventory of OEM Ford Contour Brake Caliper at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Contour Brake Caliper Parts Questions & Experts Answers

  • Q: How to service and repair a brake caliper on Ford Contour?
    A: The brake caliper requires removal before any servicing or repairing operations begin. A block of wood or shop rags should be used to isolate the caliper piston from caliper housing due to safety reasons. Compressed air extraction provides the necessary tool to remove the caliper piston from the housing before proceeding with caliper piston removal. The service technician should inspect the caliper piston and piston bore for signs of pitting and scoring before renewing damaged parts. Start by lubricating the piston bore and piston seal and caliper piston with High Performance DOT 3 brake fluid C6AZ-9542-AB or any equivalent that complies with Ford specifications E5A-M6C25-A. After that place a new piston seal inside the machined groove of the piston bore and attach a new dust cap to the caliper piston. Be careful to avoid damaging the caliper piston when putting it into the caliper bore because you should lastly reinstall the caliper while properly seating the dust cap.

Related Ford Contour Parts