My Garage
Cart

OEM Ford Contour Brake Pads

Disc Brake Pad Set
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Pads found

  • Ford Contour Brake Pads - 2U2Z-2V001-JA
    Ford Contour Brake Pads Diagram - 2U2Z-2V001-JA
    View related parts

    Ford Contour Brake Pads Part Number: 2U2Z-2V001-JA

    $28.36 MSRP: $38.59
    You Save: $10.23 (27%)
    ADD TO CART
    Product Specifications
    • Other Name: Pad; Disc Brake Pad Set; Front Pads
    • Replaces: XS8Z-2001-BA, XU2Z-2V001-XA, XS8Z-2001-CA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    Fits the following Vehicles:
    • 1995-2000 Ford Contour | Base, GL, GL Sport, LX, LX Sport, SE, Sport, SVT | 4 Cyl 2.0 L BI-FUEL, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
  • Ford Contour Brake Pads - 2S8Z2001BA
    Ford Contour Brake Pads Diagram - 2S8Z2001BA
    View related parts

    Ford Contour Brake Pads, Front Part Number: 2S8Z2001BA

    $68.48 MSRP: $93.19
    You Save: $24.71 (27%)
    ADD TO CART
    Product Specifications
    • Other Name: Kit Front Brake Pad; Disc Brake Pad Set; Front Pads; Kit - Caliper Brake Pad
    • Position: Front
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    Fits the following Vehicles:
    • 1998-2000 Ford Contour | Base, GL, LX, SE, SVT | 4 Cyl 2.0 L BI-FUEL, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS

Ford Contour Brake Pads

OEM Brake Pads boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Brake Pads with long life and a perfect fit. Come to our website and find genuine Ford Contour parts. We keep a wide inventory of OEM Contour parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Ford Contour Brake Pads are critical components of the car which is famous for it conventional brake pads. These brake pads are specially formulated to achieve a rubbing contact with the brake rotors, and therefore act to heat up the kinetic energy equivalent in order to provide the needed braking force safely and with optimum efficiency. These brake pads fit different car models of the Ford Contour that was manufactured between 1995 and 2000, and comes in different types; the non-metallic, semi-metallic, fully metallic, and even ceramic types which have enhanced friction, wear firmness and minimum noise-producing abilities. Proper maintenance of the car and these brake pads particularly when they should be replaced after every 50, 000 miles will allow the Ford contour to have the best operation while greatly enhancing safety. The included wear sensors notify drivers of when the brake pads are low at minimum thickness, thus improving safety. The Ford Contour which fell under the mid-size car category was based on the CDW27 with its impressive features that included performance and comfort and therefore had its brake pads as a vital factor when it came to driving. It must be noted that the USP of the Ford Contour Brake Pads are free from noise, and offers maximum and constant braking. Lastly, the Ford Contour Brake Pads improve the braking capacity of the vehicle and also contribute to the safety of the passengers making them as one of the best recommendations for the Ford Contour car owners.

Ford Contour Brake Pads Parts and Q&A

  • Q: How to service and repair the front brake pads on Ford Contour?
    A:
    Service and repair procedures for front brake pads start with loosening wheel nuts followed by raising and supporting the vehicle before removing the wheel. Disassemble the brake pad clip while detaching the Brake Caliper securely while protecting the flexible brake hose from getting damaged. The installation begins with removing first the bolt covers and then the bolts which allow removal of both brake pads. Before installing new pads you should fully retract the caliper piston while knowing that piston insertion will create a fluid leak from the master cylinder. It is important to thoroughly clean the disc faces before putting on the inner brake pad while also using the outer pad next. Reinstallation of the caliper involves fastening the bolts followed by replacement of bolt covers then pad clip installation and completing with wheel installation.

Related Ford Contour Parts