How to Service and Repair the Rear ABS Sensor on Ford Crown Victoria?

The rear seat bottom should be removed as the first step for servicing or repairing the rear ABS sensor. The service technician should first disconnect the rear ABS sensor electrical connector before pushing the sensor harness grommet through the passenger compartment floor. Raise the vehicle before you disconnect the routing clips. Begin by removing the bolt on the rear ABS sensor before extracting its sensor from the system. One should reverse all steps from the removal process to finalize the installation.

How to service the front ABS sensor on Ford Crown Victoria?

Service of the front ABS sensor starts with disconnecting the electrical connector of the front ABS sensor. The first step requires lifting the vehicle before supporting it while removing both routing clips and front ABS sensor. The sensor accessibility requires bolt removal before extraction. The installation steps should be done in reverse order to the removal process.

OEM Ford Crown Victoria ABS Sensor

ABS Wheel Speed Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 ABS Sensors found

View related parts
Ford Crown Victoria ABS Sensor Part Number: F5AZ-2C204-AA
$84.19 MSRP: $116.47
You Save: $32.28 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor; Speed Sensor; Front Speed Sensor
- Manufacturer Note: RH AND LH
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995-1997 Ford Crown Victoria | Base, LX, Police Interceptor, S | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria ABS Sensor, Front Part Number: F8AZ-2C204-AB
$49.19 MSRP: $73.67
You Save: $24.48 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Front Left, Front Right; Speed Sensor; Front Speed Sensor; ABS Wheel Speed Sensor
- Manufacturer Note: RH & LH
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2002 Ford Crown Victoria | Base, LWB, LX, Police Interceptor, S | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria ABS Sensor, Rear Part Number: 8W1Z-2C190-A
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Rear, Rear Left, Rear Right; Rear Speed Sensor; ABS Wheel Speed Sensor
- Manufacturer Note: Rear
- Position: Rear
- Replaces: 6W1Z-2C190-A, 5W1Z-2C190-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2011 Ford Crown Victoria | Base, LWB, LX, LX Sport, Police Interceptor, S, Special Edition | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria ABS Sensor, Rear Part Number: 3W1Z-2C190-AB
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Rear Left, Rear Right; Rear Speed Sensor; ABS Wheel Speed Sensor
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford Crown Victoria | Base, LWB, LX, LX Sport, Police Interceptor, S | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria ABS Sensor Part Number: 6W1Z-2C204-A
Product Specifications
- Other Name: Wire Assembly - Jumper; Wheel Bearing and Hub Assembly; Wheel Bear & Hub Assembly; Speed Sensor; Front Speed Sensor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2011 Ford Crown Victoria | Base, LWB, LX, Police Interceptor | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria ABS Sensor Part Number: FOVY-2C204-AA
Product Specifications
- Other Name: Sensor Assembly; Speed Sensor; Front Speed Sensor
- Manufacturer Note: RH AND LH
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-1994 Ford Crown Victoria | Base, LX, Police Interceptor, S, Touring Sedan | 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria ABS Sensor Part Number: F8AZ-2C190-AB
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor; Speed Sensor; Rear Speed Sensor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2000 Ford Crown Victoria | Base, LX, Police Interceptor, S | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria ABS Sensor Part Number: F5AZ-2C190-AB
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor; Speed Sensor; Rear Speed Sensor
- Manufacturer Note: EXC. LIMO
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995-1997 Ford Crown Victoria | Base, LX, Police Interceptor, S | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria ABS Sensor Part Number: F1VY-2C190-AA
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor; Speed Sensor; Rear Speed Sensor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-1994 Ford Crown Victoria | Base, LX, Police Interceptor, S, Touring Sedan | 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria ABS Sensor, Rear Driver Side Part Number: 1W1Z-2C190-AB
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Rear Left, Rear Right; Speed Sensor; Rear Speed Sensor; ABS Wheel Speed Sensor
- Manufacturer Note: Less limo
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2002 Ford Crown Victoria | Base, LWB, LX, Police Interceptor, S | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS

Ford Crown Victoria ABS Sensor

OEM ABS Sensor boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get ABS Sensor with long life and a perfect fit. Come to our website and find genuine Ford Crown Victoria parts. We keep a wide inventory of OEM Crown Victoria parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Ford Crown Victoria ABS Sensor is a component that plays a significant role in the functioning of the Anti-lock Braking System that is commonly used in the Ford Crown Victoria automobile brand that is famous for its sturdiness and efficiency. This ABS Sensor is used for measuring the wheel speed, for preventing the lock up of wheels and for achieving a controlled ending of the car. Employing a magnet with a hall sensor effect or a toothed wheel with an electromagnetic coil the Ford Crown Victoria ABS Sensor creates voltage signal which has to be supplied to the control module of the presence of the ABS about wheel speed. This enable the system to regulate the pressure of the brake, greatly improve not only efficiency but also safety. It is ideally suitable for numerous Ford Crown Victoria type of cars and loyal to various types of braking strategies with an aim of providing a consistent response. It may be slightly less accurate at lower speeds but its involvement in increasing safety of vehicles cannot doubted. The Commonly used Ford Crown Victoria ABS Sensor facilitates the automotive market with rugged build and accurate construction for its optimum use. Also, the availability of special options, such as the Lifeguard safety package which is installed in some of the Crown Victoria models, proves the significance of the ABS Sensor in maintaining the safety of drivers and passengers. Thus, the Ford Crown Victoria ABS Sensor has been approved to be one of the best products for those who want only the best for their cars and the Ford Crown Victoria in particular because it guarantees reliability and great performance.

Ford Crown Victoria ABS Sensor Parts and Q&A

ABS Sensor, Rear Driver Side
1W1Z-2C190-AB
Q: How to Service and Repair the Rear ABS Sensor on Ford Crown Victoria?
A:
The rear seat bottom should be removed as the first step for servicing or repairing the rear ABS sensor. The service technician should first disconnect the rear ABS sensor electrical connector before pushing the sensor harness grommet through the passenger compartment floor. Raise the vehicle before you disconnect the routing clips. Begin by removing the bolt on the rear ABS sensor before extracting its sensor from the system. One should reverse all steps from the removal process to finalize the installation.
ABS Sensor, Front
F8AZ-2C204-AB
Q: How to service the front ABS sensor on Ford Crown Victoria?
A:
Service of the front ABS sensor starts with disconnecting the electrical connector of the front ABS sensor. The first step requires lifting the vehicle before supporting it while removing both routing clips and front ABS sensor. The sensor accessibility requires bolt removal before extraction. The installation steps should be done in reverse order to the removal process.