How to service and repair the lower ball joint on Ford Crown Victoria?

To access the lower ball joint, take off the wheel knuckle and get rid of the snap ring. Install the new ball joint, using the C-Frame and Screw Installer/Remover, without damaging the boot and making sure that the snap ring is completely inserted. Lastly, replace the knuckle of the wheel.

How to service the upper ball joint on Ford Crown Victoria?

In order to service the upper ball joint, lift the car, take the wheel off and hold the lower arm. Take out the nut, pinch bolt and trace the alignment cams. Take off old nuts, and put in new ones, and adjust reference marks. Undo the process of installation and adjust the wheels, making necessary changes.

OEM Ford Crown Victoria Ball Joint

Control Arm Joint

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Ball Joints found

View related parts
Ford Crown Victoria Upper Ball Joint Part Number: F7AZ-3049-AA
$54.37 MSRP: $73.98
You Save: $19.61 (27%)
ADD TO CART
Product Specifications
- Other Name: Joint Assembly - Ball; Suspension Ball Joint; Ball Joint; Upper Ball Joints
- Manufacturer Note: RH & LH
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995-2002 Ford Crown Victoria | Base, LWB, LX, Police Interceptor, S | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Lower Ball Joint, Front Part Number: 6W1Z-3050-A
$47.06 MSRP: $74.73
You Save: $27.67 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint Assembly - Ball; Suspension Ball Joint, Front Lower; Suspension Ball Joint; Ball Joint
- Manufacturer Note: Kit with ball-joint, retaining ring and sketch
- Position: Front Lower
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2011 Ford Crown Victoria | Base, Fleet, LWB, LX, LX Sport, Police Interceptor, S, Special Edition | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Lower Ball Joint Part Number: F8AZ-3050-A
$87.61 MSRP: $147.09
You Save: $59.48 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint Assembly - Ball; Suspension Ball Joint; Ball Joint
- Replaces: F8AZ-3050-AA, MCSOE-56
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2002 Ford Crown Victoria | Base, LWB, LX, Police Interceptor, S | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Upper Ball Joint, Passenger Side Part Number: F1VY-3049-B
Product Specifications
- Other Name: Joint Assembly - Ball; Suspension Ball Joint; Ball Joint; Upper Ball Joints
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-1994 Ford Crown Victoria | Base, LX, Police Interceptor, S, Touring Sedan | 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Upper Ball Joint, Driver Side Part Number: F1VY-3049-A
Product Specifications
- Other Name: Joint Assembly - Ball; Suspension Ball Joint; Ball Joint; Upper Ball Joints
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-1994 Ford Crown Victoria | Base, LX, Police Interceptor, S, Touring Sedan | 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Lower Ball Joint Part Number: 2W7Z-3050-AA
Product Specifications
- Other Name: Joint Assembly - Ball; Suspension Ball Joint; Ball Joint
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2002 Ford Crown Victoria | Base, LWB, LX, Police Interceptor, S | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS

Ford Crown Victoria Ball Joint

Welcome to our website where you can discover high-quality, genuine Ford Crown Victoria Ball Joint. We offer an extensive inventory of OEM Ford Crown Victoria Ball Joint at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Crown Victoria Ball Joint Parts and Q&A

Lower Ball Joint, Front
6W1Z-3050-A
Q: How to service and repair the lower ball joint on Ford Crown Victoria?
A: To access the lower ball joint, take off the wheel knuckle and get rid of the snap ring. Install the new ball joint, using the C-Frame and Screw Installer/Remover, without damaging the boot and making sure that the snap ring is completely inserted. Lastly, replace the knuckle of the wheel.
Lower Ball Joint
2W7Z-3050-AA
Q: How to service the upper ball joint on Ford Crown Victoria?
A: In order to service the upper ball joint, lift the car, take the wheel off and hold the lower arm. Take out the nut, pinch bolt and trace the alignment cams. Take off old nuts, and put in new ones, and adjust reference marks. Undo the process of installation and adjust the wheels, making necessary changes.