How to service and repair the evaporator core on Ford Crown Victoria?

Service and repair of the evaporator core should begin with disconnecting the battery's ground cable. The service requires you to perform the Refrigerant Discharging and Recovery Procedure. Separate the two halves of the evaporator housing by removing six screws that secure the A/C evaporator core housing followed by precise cutting of the seal into two places. The tubing installation requires using a back up wrench to maintain the fitting and tube from getting damaged during suction accumulator/drier removal from the evaporator core outlet tube. Extract the screws then get rid of both the suction accumulator/drier followed by the removal of the A/C evaporator core. Install by reversing the removal steps while servicing the new evaporator core with PAG compressor oil YN-12-C F7AZ-19589-DA or an equivalent approved by Ford WSH-M1C231-B specification. Also apply the same oil to lubricate the seal.

OEM Ford Crown Victoria Evaporator

A/C Evaporator Core

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Evaporators found

View related parts
Ford Crown Victoria Evaporator Core
Part Number: F1VZ-19860-BA
$115.46 MSRP: $159.73
You Save: $44.27 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Core - Air Conditioning Evaporator; A/C Evaporator Core Repair Kit; A/C Evaporator Core; A/C Evaporator; Evaporator
- Replaces: F1VY-19860-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-1997 Ford Crown Victoria | Base, LX, Police Interceptor, S, Touring Sedan | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Evaporator Core
Part Number: 3W7Z-19860-AA
$93.44 MSRP: $153.75
You Save: $60.31 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Core - Air Conditioning Evaporator; A/C Evaporator Core; A/C Evaporator Core Repair Kit; A/C Evaporator; Evaporator
- Manufacturer Note: Quick disconnect at the 19c836
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2011 Ford Crown Victoria | Base, LWB, LX, LX Sport, Police Interceptor, S, Special Edition | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Evaporator Core
Part Number: 7W7Z-19850-A
Product Specifications
- Other Name: Evaporator Assembly; A/C Evaporator Core and Case Assembly; A/C Evaporator Core Repair Kit; Housing Assembly; A/C Evaporator
- Replaces: 6W7Z-19850-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2011 Ford Crown Victoria | Base, LWB, LX, LX Sport, Police Interceptor | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Evaporator Core, Driver Side
Part Number: 1W1Z-19850-CA
Product Specifications
- Other Name: Evaporator Assembly; A/C Evaporator Core Repair Kit; A/C Evaporator; Housing Assembly; Case Assembly; Case; Housing
- Manufacturer Note: FROM 5/1/01
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-2002 Ford Crown Victoria | Base, LWB, LX, Police Interceptor, S, Touring Sedan | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Evaporator Core
Part Number: 7W7Z-19850-B
Product Specifications
- Other Name: Evaporator Assembly; A/C Evaporator Core and Case Assembly; A/C Evaporator Core Repair Kit; Housing Assembly; A/C Evaporator
- Replaces: 6W7Z-19850-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2011 Ford Crown Victoria | Base, LWB, LX, LX Sport, Police Interceptor | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Evaporator Assembly
Part Number: 5W7Z-19850-CA
Product Specifications
- Other Name: A/C Evaporator Core and Case Assembly; A/C Evaporator Core Repair Kit; Housing Assembly; A/C Evaporator
- Manufacturer Note: For vehicles built before 12/06/04 also order 5W7Z-19A786-AA tube, 4W7Z-19A706-A resistor & 3U2Z-14S411-ZEA pigtail., w/ manual A/C, FROM 12/06/2004
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2005 Ford Crown Victoria | Base, LWB, LX, LX Sport, Police Interceptor, S, Special Edition | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Evaporator Assembly
Part Number: 3W7Z-19850-DA
Product Specifications
- Other Name: A/C Evaporator Core and Case Assembly; A/C Evaporator Core Repair Kit; Housing Assembly; A/C Evaporator
- Manufacturer Note: For vehicles built before 2/18/05 also order 5W7Z-19A786-AA., with ATC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2005 Ford Crown Victoria | Base, LWB, LX, LX Sport, Police Interceptor, S, Special Edition | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS

Ford Crown Victoria Evaporator

Welcome to our website where you can discover high-quality, genuine Ford Crown Victoria Evaporator. We offer an extensive inventory of OEM Ford Crown Victoria Evaporator at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Crown Victoria Evaporator Parts Questions & Experts Answers

Evaporator Core, Driver Side
1W1Z-19850-CA
Q: How to service and repair the evaporator core on Ford Crown Victoria?
A: Service and repair of the evaporator core should begin with disconnecting the battery's ground cable. The service requires you to perform the Refrigerant Discharging and Recovery Procedure. Separate the two halves of the evaporator housing by removing six screws that secure the A/C evaporator core housing followed by precise cutting of the seal into two places. The tubing installation requires using a back up wrench to maintain the fitting and tube from getting damaged during suction accumulator/drier removal from the evaporator core outlet tube. Extract the screws then get rid of both the suction accumulator/drier followed by the removal of the A/C evaporator core. Install by reversing the removal steps while servicing the new evaporator core with PAG compressor oil YN-12-C F7AZ-19589-DA or an equivalent approved by Ford WSH-M1C231-B specification. Also apply the same oil to lubricate the seal.