How to service and repair the ignition switch on Ford Crown Victoria?

Service and repair operations on the ignition switch need to start by depowering the supplemental restraint system (SRS). Start by placing the ignition switch lock cylinder at RUN and use a suitable tool to push upward on the release tab which allows you to pull the cylinder outward. First unlatch and remove the tilt lever from the steering wheel before pushing the upper steering column shroud sides to release it. The upper and lower steering column shrouds need their three screws removed but reinstallation must follow with screw tightening to 2 Nm (18 inch lbs.). Disconnect the ignition switch electrical connector before removing its screw to extract the switch while torquing it to 5 Nm (44 inch lbs.) during installation. The SRS repowering process should start with a reversal of the removal sequence.

OEM Ford Crown Victoria Ignition Switch

Starter Ignition Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Ignition Switches found

View related parts
Ford Crown Victoria Ignition Switch
Part Number: F4DZ-11572-B
$46.77 MSRP: $75.45
You Save: $28.68 (39%)
ADD TO CART
Product Specifications
- Other Name: Switch Assembly - Ignition
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-2004 Ford Crown Victoria | Base, LWB, LX, LX Sport, Police Interceptor, S, Touring Sedan | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Ignition Switch
Part Number: 5W1Z-11572-AA
$41.23 MSRP: $65.47
You Save: $24.24 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly - Ignition
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2011 Ford Crown Victoria | Base, LWB, LX, LX Sport, Police Interceptor, S, Special Edition | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS

Ford Crown Victoria Ignition Switch

Welcome to our website where you can discover high-quality, genuine Ford Crown Victoria Ignition Switch. We offer an extensive inventory of OEM Ford Crown Victoria Ignition Switch at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Crown Victoria Ignition Switch Parts Questions & Experts Answers

Ignition Switch
5W1Z-11572-AA
Q: How to service and repair the ignition switch on Ford Crown Victoria?
A: Service and repair operations on the ignition switch need to start by depowering the supplemental restraint system (SRS). Start by placing the ignition switch lock cylinder at RUN and use a suitable tool to push upward on the release tab which allows you to pull the cylinder outward. First unlatch and remove the tilt lever from the steering wheel before pushing the upper steering column shroud sides to release it. The upper and lower steering column shrouds need their three screws removed but reinstallation must follow with screw tightening to 2 Nm (18 inch lbs.). Disconnect the ignition switch electrical connector before removing its screw to extract the switch while torquing it to 5 Nm (44 inch lbs.) during installation. The SRS repowering process should start with a reversal of the removal sequence.