How to service the front ABS sensor on Ford E-150 Econoline?

The front ABS sensor service for E-150 begins with separating the front ABS sensor wire from the front brake hose followed by disconnecting the electrical connector. The front ABS sensor needs its bolt to be removed next. First detach the front ABS sensor along with its bolt. During installation perform the operations in the opposite order of removal procedures.

How to service the rear ABS sensor on Ford E-150 Econoline?

Service of the rear ABS sensor starts by raising and supporting the vehicle. Clear away dust along with debris surrounding the rear ABS sensor before you start the removal process. Begin by disconnecting the electrical connector of the rear ABS sensor while using a wrench to remove the bolt that secures both the sensor and the bolt. Finally, remove the sensor from the wheel. Before installing the sensor, check that the mounting surface is clean, and you should also inspect the O-ring on the ABS sensor for any signs of damage. The O-ring needs a small amount of lubrication with SAE-75W-140 High Performance Rear Axle Lubricant F1TZ-19580-B or another product that meets Ford specification WSL-M2C192-A. The sensor installation ends after completing the backward procedure of removal.

OEM Ford E-150 Econoline ABS Sensor

ABS Wheel Speed Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 ABS Sensors found

View related parts
Ford E-150 Econoline ABS Sensor, Passenger Side Part Number: 6C2Z-2C204-AA
$103.53 MSRP: $173.82
You Save: $70.29 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor; Front Speed Sensor
- Position: Passenger Side
- Replaces: 4C2Z-2C204-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2002 Ford E-150 Econoline | Base, XL | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford E-150 Econoline ABS Sensor, Driver Side Part Number: 6C2Z-2C204-AB
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor; Front Speed Sensor
- Position: Driver Side
- Replaces: 4C2Z-2C204-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2002 Ford E-150 Econoline | Base, XL | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford E-150 Econoline Speed Sensor Part Number: 6L3Z-2B373-A
$774.00 MSRP: $1058.46
You Save: $284.46 (27%)
Product Specifications
- Other Name: Valve Assembly - Modulator; ABS Hydraulic Assembly; Control Valve; Control Module; Modulator Valve
- Replaces: XL3Z-2B373-BARM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2002 Ford E-150 Econoline | Base, XL | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L GAS
View related parts
Ford E-150 Econoline ABS Sensor, Driver Side Part Number: XC2Z-2C205-BB
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor; Front Speed Sensor
- Manufacturer Note: LH, straight end sensor
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2002 Ford E-150 Econoline | Base, XL | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford E-150 Econoline ABS Sensor, Driver Side Part Number: F7UZ-2C204-CB
Product Specifications
- Other Name: Sensor Assembly; Front Speed Sensor
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1994-1998 Ford E-150 Econoline | Base, XL | 6 Cyl 4.2 L GAS, 6 Cyl 4.9 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
View related parts
Ford E-150 Econoline ABS Sensor, Passenger Side Part Number: F7UZ-2C204-BB
Product Specifications
- Other Name: Sensor Assembly; Front Speed Sensor
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1994-1998 Ford E-150 Econoline | Base, XL | 6 Cyl 4.2 L GAS, 6 Cyl 4.9 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS

Ford E-150 Econoline ABS Sensor

OEM ABS Sensor boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get ABS Sensor with long life and a perfect fit. Come to our website and find genuine Ford E-150 Econoline parts. We keep a wide inventory of OEM E-150 Econoline parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Ford E-150 Econoline ABS Sensor Parts and Q&A

ABS Sensor, Passenger Side
6C2Z-2C204-AA
Q: How to service the front ABS sensor on Ford E-150 Econoline?
A:
The front ABS sensor service for E-150 begins with separating the front ABS sensor wire from the front brake hose followed by disconnecting the electrical connector. The front ABS sensor needs its bolt to be removed next. First detach the front ABS sensor along with its bolt. During installation perform the operations in the opposite order of removal procedures.
Speed Sensor
6L3Z-2B373-A
Q: How to service the rear ABS sensor on Ford E-150 Econoline?
A:
Service of the rear ABS sensor starts by raising and supporting the vehicle. Clear away dust along with debris surrounding the rear ABS sensor before you start the removal process. Begin by disconnecting the electrical connector of the rear ABS sensor while using a wrench to remove the bolt that secures both the sensor and the bolt. Finally, remove the sensor from the wheel. Before installing the sensor, check that the mounting surface is clean, and you should also inspect the O-ring on the ABS sensor for any signs of damage. The O-ring needs a small amount of lubrication with SAE-75W-140 High Performance Rear Axle Lubricant F1TZ-19580-B or another product that meets Ford specification WSL-M2C192-A. The sensor installation ends after completing the backward procedure of removal.