How to Service and Repair the Brake Backing Plate on Ford E-150 Econoline?

The first step for servicing or repairing the backing plate requires removal of both the rear brake shoes together with their linings. Begin the repair process by removing the axle shaft and possibly the axle shaft along with the rear hub if both items are needed for removal. Compression of the cable retainer will detach both the parking brake rear cable and conduit from the brake backing plate. Disconnect the brake line fitting first to remove the rear wheel cylinder then remove its two bolts for final removal of the cylinder. You must remove the brake backing plate by taking out its four backing plate-to-axle flange nuts and bolts. Reverse the installation process while making sure to perform brake system bleeding before finishing the work.

OEM Ford E-150 Econoline Brake Backing Plate

Brake Dust Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Brake Backing Plates found

View related parts
Ford E-150 Econoline Backing Plate, Rear Part Number: F7UZ-2212-AA
Product Specifications
- Other Name: Plate Assembly - Brake Back; Brake Backing Plate, Rear Left, Rear Right; Brake Dust Shield
- Manufacturer Note: Plate asy. - rear wheel brake - LH
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2002 Ford E-150 Econoline | Base, XL | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L GAS
View related parts
Ford E-150 Econoline Backing Plate, Rear Passenger Side Part Number: F7UZ-2211-AA
Product Specifications
- Other Name: Plate Assembly - Brake Back; Brake Backing Plate, Rear Right; Brake Dust Shield
- Manufacturer Note: Plate asy. - rear wheel brake - RH
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2002 Ford E-150 Econoline | Base, XL | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L GAS
View related parts
Ford E-150 Econoline Splash Shield, Front Driver Side Part Number: F6TZ-2K005-EA
Product Specifications
- Other Name: Shield - Splash; Brake Dust Shield, Front Left; Brake Dust Shield
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-2002 Ford E-150 Econoline | Base, XL | 6 Cyl 4.2 L GAS, 6 Cyl 4.9 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
View related parts
Ford E-150 Econoline Splash Shield, Front Passenger Side Part Number: F6TZ-2K004-EA
Product Specifications
- Other Name: Shield - Splash; Brake Dust Shield, Front Right; Brake Dust Shield
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-2002 Ford E-150 Econoline | Base, XL | 6 Cyl 4.2 L GAS, 6 Cyl 4.9 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
View related parts
Ford E-150 Econoline Backing Plate, Rear Driver Side Part Number: E5TZ-2212-B
Product Specifications
- Other Name: Plate Assembly - Brake Backing; Brake Backing Plate, Rear Left; Brake Dust Shield; Splash Shield
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1984-1996 Ford E-150 Econoline | Base, Custom, XL | 6 Cyl 4.9 L GAS, 6 Cyl 4.9 L LPG, 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS
View related parts
Ford E-150 Econoline Backing Plate, Rear Driver Side Part Number: E4TZ-2212-B
Product Specifications
- Other Name: Plate Assembly - Brake Backing; Brake Backing Plate, Rear Left; Brake Dust Shield
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1990-1991 Ford E-150 Econoline | Custom, XL | 6 Cyl 4.9 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS
View related parts
Ford E-150 Econoline Backing Plate, Rear Passenger Side Part Number: E4TZ-2211-B
Product Specifications
- Other Name: Plate Assembly - Brake Backing; Brake Backing Plate, Rear Left, Rear Right; Brake Dust Shield
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1990-1991 Ford E-150 Econoline | Custom, XL | 6 Cyl 4.9 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS
View related parts
Ford E-150 Econoline Backing Plate, Rear Passenger Side Part Number: E5TZ-2211-B
Product Specifications
- Other Name: Plate Assembly - Brake Backing; Brake Backing Plate, Rear Right; Brake Dust Shield; Splash Shield; Support Plate
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1984-1996 Ford E-150 Econoline | Base, Custom, XL | 6 Cyl 4.9 L GAS, 6 Cyl 4.9 L LPG, 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS

Ford E-150 Econoline Brake Backing Plate

OEM Brake Backing Plate boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Brake Backing Plate with long life and a perfect fit. Come to our website and find genuine Ford E-150 Econoline parts. We keep a wide inventory of OEM E-150 Econoline parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Ford E-150 Econoline Brake Backing Plate Parts and Q&A

Backing Plate, Rear Passenger Side
F7UZ-2211-AA
Q: How to Service and Repair the Brake Backing Plate on Ford E-150 Econoline?
A:
The first step for servicing or repairing the backing plate requires removal of both the rear Brake Shoes together with their linings. Begin the repair process by removing the Axle Shaft and possibly the axle shaft along with the rear hub if both items are needed for removal. Compression of the cable retainer will detach both the parking brake rear cable and conduit from the brake backing plate. Disconnect the brake line fitting first to remove the rear Wheel Cylinder then remove its two bolts for final removal of the cylinder. You must remove the brake backing plate by taking out its four backing plate-to-axle flange nuts and bolts. Reverse the installation process while making sure to perform brake system bleeding before finishing the work.