Service and repair of the windshield washer reservoir requires hood support through proper hood lifting followed by battery removal before unscrewing the battery tray bolts. The windshield
Washer Pump and reservoir can be removed by first opening the nut and bolt then disconnecting the filler hose and electrical connector before separating the wiring harness locator from the washer pump and reservoir followed by disconnecting the windshield washer hose where you should collect the spilled washer fluid into a container. The washer pump should be taken apart from the reservoir following the detachment of all components. The installation requires following the removal steps in reverse order while adding windshield washer fluid to the reservoir. Users must refrain from electrical connection until the reservoir has its contents and should bypass operating the washer pump until the reservoir reaches full capacity. Upon reconnecting the battery to the vehicle expect abnormal performance since the electronic control system will relearn its adaptive approach during a drive that might need at least 16 km (10 mi) travel.